Electric Fogger Owner's Manual Model: F-8, F-16 (115 V~60Hz) Read and save these instructions www.xpower.com | 1-(855)-855-8868 | info@xpower.com Index: NA-1-30 Edition: 1.2.
Safety Instructions ! WARNING: READ AND SAVE THESE INSTRUCTIONS BEFORE USING THIS PRODUCT. When using electrical appliances, especially when children or animals are present, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including, but not limited to the following: • DO NOT attempt to perform any service or maintenance not outlined in instruction manual. • WARNING: To reduce the risk of electric shock – Use indoors only.
(3) Oil, or other organic oils (4) Suspensions, such as water with sands (5) Detergents Grounding Instructions (For Model F-16) This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug.
Electric Fogger Introduction • The Electric Fogger produces ULV fine mist with high velocity airflow helping the distribution of different liquids to the indoor space and surfaces for varies applications.
Parts Description Speed Switch / Power Switch Solution Tank Cover Fogging Volume Control Solution Tank Fogging Outlet Power Cord Air Inlet Air Outlet Operation Guide Change the Fogging Outlet* • Turn counterclockwise to uninstall the fogging outlet cover and take out the fogging outlet. Apply the new fogging outlet and reinstall the fogging outlet cover. • The size of the fogging outlet varies and produces different fogging effects.
Control Panel Fogging Volume Control • Turn counterclockwise to highen the fogging volume. Turn clockwise to lowen the fogging volume. • When at the lowest position, no liquid will coming out. Speed Switch (For model F-16 only) • Switch to “O” setting to turn the machine OFF. • Switch to other settings to turn the machine on. “I”/“II” means the lower/higher speed setting. Power Switch (For model F-8 only) • Switch to “O” setting to turn the machine OFF. Switch to “I” setting to turn the machine ON.
Start Your Job (Continued) Select a Power Source with a Proper Location • Check the throw distance of the machine. (See Page 10: Technical Specifications) • Please find a power source with a proper location where the fogging droplets can reach designated objects. Start Fogging • Connect the machine to power source. • IMPORTANT: Make sure the fogging volume control is on the lowest setting before turning the power on. • Turn on the machine and set to designated speed.
Start Your Job (Continued) • Use proper methods of cleaning for the solution tank. (See Page 8: Fogging System Maintenance) User Maintenance and Servicing Instructions Frequent maintenance is recommended on this appliance. Failure to follow the maintenance instructions may cause failure of the appliance and void the warranty. Always disconnect the machine from the power source before any maintenance or servicing. Cleaning the Surface • Use a damp cloth to wipe the surface of the housing.
Fogging System Maintenance (Continued) • You might follow the cleaning and disposal instructions of the liquids used for fogging if applicable. • WARNING: Filling these types of solution / liquid into the solution tank for cleaning, may cause safety hazzards, corrosive damages to the machine or blockage of the fogging system.
Technical Specification MODEL NUMBER F-8 F-16 Voltage/Frequency 115 V~60 Hz Amperage 3.0 A 4.5 A Solution Tank Capacity 800 ml 1600 ml Airflow Speed Settings 1 Speed 2 Speeds 20 ft. / 6.1 m 25 ft. / 7.6 m Cord Length Housing PP Unit Dimension (L) x (W) x (H) Unit Weight 12.1 x 6.4 x 7.8 in. / 30.7 16.2 x 19.7 cm 14.6 x 6.8 x 8.3 in. / 37.1 x 17.2 x 21.0 cm 4.9 lbs. /2.2 kg 6.0 lbs. /2.73 kg Safety Certification ETL/C-ETL If your product(s) is not listed above, please visit www.
country will cover products purchased outside the U.S. Items mentioned but not limited to below are not covered by warranty: ! IMPORTANT: (1) Please finish the online warranty registration before usage. Visit www.xpower.com/ service-support/warranty-registration. (2) This Limited Warranty applies with its own timeliness. Contact XPOWER or visit www.xpower.com for more information. (1) Power cord, filters or any other components considered as a “consumable parts” by XPOWER. (2) Normal wear and tear.
XPOWER Manufacture, INC. 668 S. 6th Ave., City of Industry, CA 91746 USA www.xpower.com | 1-(855)-855-8868 | info@xpower.com Read and save these instructions Paper Size: A4/297 mm x 210 mm Layout: A5/148 mm x 210 mm Index: NA-1-30 Edition: 1.2.