Use and Care Manual

Operation
XPOWER Mini Air Movers are intended to move air and to dry small areas where the large air
mover is not applicable such as crawl spaces, inside cabinets, under counters, inside ceilings,
basements, etc. The Mini Air Mover can also be used as a high velocity fan for household use.
1. XPOWER air movers are shipped ready-to-use. Prior to plugging the unit into the power
source, inspect completely for any shipping damage.
2. Plug the electrical cord into the power outlet.
3. Carefully place the Air Mover on a stable, flat, dry surface.
4. The unit is capable to be used at 4 different angles to direct airflow.
5. Turn the switch to select desired speed, while making sure the unit operates normally.
6. To reduce the risk of injury, close supervision is necessary when the appliance is used near
children. Do not allow children to play with or around an air mover at any time.
- 3 -
Daisy-chain Feature
If utilizing the Daisy-chain feature, only allow up to two additional air
movers or other devices running together on total 12 AMPs circuit.
P-100A & P-130A air movers have an on-board circuit breaker. If the
auxiliary outlet overloads, the circuit breaker will trip. If the breaker
does trip, unplug the units and press the circuit breaker Reset button.
Plug the units back into the power source and turn on the switch.