Axial Fan Owner's Manual Model : P-21AR, P-26AR (115V 60HZ) Read and save these instructions before use www.xpower.com | 1-(855)-855-8868 | info@xpower.com Index: NA-1-A6 Edition: 2.1.
Safety Instructions ! WARNING - READ AND SAVE THIS INSTRUCTIONS BEFORE USING THIS PRODUCT. The user of electrical products may create hazards that include, but are not limited to injury, fire, electrical shock. Failure to follow these instructions may damage and/or impair its operation and void the warranty. • Before operating, remove all packaging material and check for any damage that may have occurred during shipping or any missing items.
Items Included Axial Fan Owner's Manual XXX Manual De Usuario (página 10) XXX Mode d'emploi (page 18) Model / Modelo / Modèle: P-80 Series, P-100 Series, P-200 Series • Axial Fan x 1 (115V 60HZ) Read and save these instructions before use Lea y guarde estas instrucciones antes de usar la unidad Lire et conserver ces instructions avant utilisation www.xpower.com | 1-(855)-8868 | info@xpower.com Index: NA-1-A2 Edition: 1.0.
Axial Fan Introduction • XPOWER Axial Fans are designed to offer efficient air circulation and ventilation with its high and long-distance focused airflow. • It’s perfect for air circulation and ventilation in janitorial/ sanitation jobs, water damage restoration and more. Operation Guide Switch Plate 1 2 3 4 OFF Speed Control Speed Switch • Turn to “OFF” position to switch the Axial Fan OFF. Turn to any speed position to switch the Axial Fan ON. • Turn clockwise to set the desired speed.
Operation Guide (Continued) Additional Electrical Receptacle (Daisy Chain) CIRCUIT BREAKER 12A TOTAL OUTPUT 12 AMPS MAX WITH THIS UNIT OFF 10 AMPS MAX WITH THIS UNIT ON • Other appliances can be plugged in the additional electrical receptacles and work whether the Axial Fan is on or off. However, the total amperage must be lower than the amperage instructed. Different models may have varying instructions.
Operation Guide (Continued) Transportation Lift with Handle • Lift the Axial Fan with the handle on the top. User Maintenance Instructions Frequent maintenance is recommended on this appliance. Failure to follow the maintenance instructions may cause failure of the appliance and void the warranty. • When not in use, unplug and store the appliance in a dry and cool indoor place. Make sure it’s out of reach of children.
User Maintenance Instructions (Continued) Fasten the Rack Handles • To prevent possible injury, when you finish using this appliance, please position the Axial Fan UPRIGHT. • Fasten the rack handle to lock the position of the Axial Fan. Organize the Power Cord • Wrap the power cord around the housing. • Clip the cord to the cord clip on the plug shown above.
User Maintenance Instructions (Continued) Stack Multiple Units • Stack the Axial Fans on the sides. Align the air inlets of both Axial Fans. ! WARNING • Do not stack more than six units of this appliance. • Stacking function is not secure during transportation. Troubleshooting Guide PROBLEM Axial fan does not start Unit runs but the speed is abnormal POSSIBLE CAUSE SOLUTION No electricity. Check for power supply. The power cord is not properly plugged in. Remove and reconnect the power cord.
Technical Specification MODEL NUMBER P-21AR Voltage/ Frequency Amperage Rated Airflow P-26AR 115 V~60 Hz 0.6 A 1.0 A 1100 CFM 1300 CFM Speed Control 4 Speeds Additional Electrical Receptacles (Daisy Chain) Yes Cord Length 10 ft. / 3.0 m Housing Unit Dimension (L) x (W) x (H) Unit Weight Safety Certification PP 16.1 x 8.9 x 14.2 in. / 41.0 x 22.5 x 36.0 cm 17.3 x 8.9 x 15.4 in./ 44.0 x 22.5 x 39.0 cm 10.4 lbs. / 4.7 kg 11.7 lbs. / 5.
XPOWER Limited Warranty (USA) 1 YEAR LIMITED WARRANTY XPOWER-branded products purchased in the U.S. from authorized distributors include a 1-year limited warranty. Contact XPOWER to confirm warranty information about your product(s). This limited warranty covers defects in materials and workmanship in your XPOWERbranded products, purchased in the U.S. ONLY. Local warranty policy (if any) in your country will cover products purchased outside the U.S.
XPOWER Limited Warranty (USA) If you are instructed to return the unit for service or replacement, please: (1) Request a RMA (Return-Merchandise-Authorization) number. (2) Use the original or an equivalent packaging, prepay shipping charges at your own expense to the address provided by XPOWER, with the RMA number on the shipping label or the packaging. (3) Include all the original parts and components. XPOWER will inspect, assess and advise the repairs needed and applicable cost, if any.
XPOWER Manufacture, INC. 240 Clary Avenue San Gabriel, CA 91776 USA www.xpower.com | 1-(855)-855-8868 | info@xpower.com Read and save these instructions before use Index: NA-1-A6 Edition: 2.1.
