PROFESSIONAL AIR MOVER OWNER’S MANUAL X-600/ X-600A/ X-630 P-600/ P-630 (115V/230V) X-600 / X-600A / X-630 P-600 / P-630 XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax: 626-285-3302 www.xpower.
Index Introduction ............................................................................................................................... 2 Operation / Instructions.............................................................................................................. 3 Safety Instructions...................................................................................................................... 4 Maintenance Instructions / Troubleshooting...........................................
Introduction XPOWER Air Movers are ETL/CETL/CE/GS certified and multifunctional Air Mover with the most efficient engineering design. All XPOW ER Air Features: • Low power draw with a velocity over 2400 CFM when switch on High. • Super quiet and super light weight. • Optional Easy clean filter system. • Easy carrying and storage stackable. • Easily disassembled for thorough cleaning and service.
Operation / Instructions XPOWER Air Movers are intended to move air and to dry floors, walls, furniture, etc. Durable and easy to operate with an effective balance of static pressure and airflow, the units are suitable for a variety of applications. 1. XPOWER Air Movers are shipped ready to be put into service. Prior to plugging the unit into the power source, inspect completely for any shipping damage. 2. Plug the electrical cord into the power outlet. 3.
Safety Instructions 1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water. 2. To avoid risk of injury, do not direct air flow at face or body. 3. To reduce the risk of fire or electric shock, do not use the Air Mover with any solid-state speed control device. 4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.
Maintenance Instructions 1. To keep the Air Mover clean, use a damp cloth to wipe the surface of the housing. 2. Never clean the Air Mover with water. 3. W hen not in use, unplug and store the Air Mover in a dry indoor place out of reach of children. 4. Always disconnect the Air Mover from its power source before performing any maintenance or cleaning. 5. Clean the filters (optional item) as often as necessary to avoid loss of airflow.
Specifications Model X-600 P-600 X-600A X-630 P-630 Power 1/3 hp 1/3 hp 1/3 hp 1/2 hp 1/2 hp Amp 3.8 A 3.8 A 3.8 A 5A 5A Weight 20 lbs 19 lbs 20 lbs 21 lbs 20 lbs Speeds Three Three Three Three Three 16 x 16 x 16 in. 16 x 16 x 16 in. 16 x 16 x 16 in. 16 x 16 x 16 in. 16 x 16 x 16 in. Daisy Chain N.A N.A YES N.A N.
XPOWER LIMITED WARRANTY XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one way shipping. The XPOWER Air Mover Housing is covered for a term of five years from the date of original purchase.
600 Series Parts List Item No. 600-1 600-3 600-5 600-7 600-9 600-11 600-13 600-15 600-17 Parts Name Left Housing Switch Plate Switch Plate Right Housing Fan Air Outlet Grid Cover Filter I (Motor Side) Rubber Feet (Not Shown) Capacitor Item No.
Daisy Chain Specifications (applicable for model X-600A) XPOW ER Air Mover Model X-600A is daisy chainable with a low 3.8 amp draw. The 12-amp on-board circuit breaker will allow two (2) additional X-600A units to run on one circuit at the same time. Note: Air Mover has an on-board circuit breaker. If the auxiliary outlet overloads, the circuit breaker will trip. If the breaker trips, unplug the units and press the circuit breaker reset button.
WARRANTY REGISTRATION Please complete and mail or fax for your product warranty. F or a multiple units, please list serial numbers on a separate sheet of paper. Address: XPOWER MANUFACTURE, INC.
From: TO: XPOWER MANUFACTURE, INC.