USER MANUAL
XPOWER’s Programmable Sanitizing System XPOWER’s Programmable Sanitizing System (PSS) is available to provide you with an easy, automated approach to overcome these challenges, boost productivity, and expand your business.
XPOWER’S EVEREST PLUS Consists of the following: SAFETY PRECAUTION INSTRUCTIONS WARNING! READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY. PLEASE SAVE IT FOR REFERENCE.
HOW DOES A PSS Make Indoor Air and Surface Sanitizing Effortless? Introducing the Programmable Sanitizing System! A PSS is an automatic, overnight solution for maintaining a clean, healthy, and odor-free indoor environment. By using trusted commercial tools and a proven method to improve your indoor air quality (IAQ) and sanitize surfaces automatically, you can reduce seasonal illness and staff absence. It’s easy, effective, and affordable.
PROGRAMMING UNITS FOR OVERNIGHT TREATMENT DIGITAL TIMER • Set the appropriate start time for the sanitizing treatment. • Run the ozone air mover first, and secondly the air scrubber to purify the air. AXIAL AIR MOVER WITH OZONE GENERATOR • Connect ozone air mover to the first outlet • Make sure you set the ozone to the “on” position and unit timer. • Set desired speed. HEPA Air Scrubber Before • Connect the air scrubber on the second outlet. • Make sure set to the “on” position. • Select desired speed.
HOW TO USE RESET: To initiate timer, push button above (R) with a pin to reset. The timer is designed with two buttons, MODE1 and MODE2, UNLOCK TIMER: Press TIMER and CLOCK at the same time to unlock. to control outlets independently and run on a set schedule so you can start every day with clean air. SET CURRENT DAY: Press and hold CLOCK, then press WEEK until the desired day of the week is selected and release. 8 On/Off Settings Select the TIMER1 or TIMER2 outlet or both to set a program.
HOW TO USE M-25 OZONE AIR MOVER Widely applies low density ozone to both air and surfaces, inactivating viruses, bacteria, and allergens and removing • Industrial ozone air mover odors. • Ozone indicator light ON / OFF switch & 3 Hr timer Step 1 Connect ozone air mover to the timer outlet. • DC brushless motor for Step 2 Turn “ON” ozone switch and set the 1-3 Hr timer. maximum energy efficiency We recommend it’s set for at least 3 hours for thorough treatment.
AP-2000 USER INTERFACE HOW TO USE 12” DUCT FILTERS The12” exhaust outlet allows for negative air applications. Comes with 3 Filter Set - 2 Pre-Filters - HEPA Filter HEPA AIR PURIFIERS Capture airborne contaminants such as dust and allergens, including particulate matter (PM) as small as 0.3 microns with 99.97% efficiency. DUST POLLEN / ALLERGENS MOLD SPORES / BACTERIA ODORS / SMOKE WRAP AROUND Wrap-around cord design keeps you organized when the job is done.
X3780 4 -STAGE FILTRATION MAINTENANCE INSTRUCTIONS AP -2000 3-STAGE FILTRATION When not in use, unplug and uninstall power cords and extensions. Store the appliance in a dry and cool indoor place. Make sure it’s out of reach of children. Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water directly. Check if the grille covers are clean. Remove dirt or objects that could block the air inlet and air outlet.
Warranty Registration Page 18 668 South 6th Avenue City of Industry, CA 91746 info@xpower.com 1.855.855.8868 www.xpower.com www.xpower.
