Use and Care Guide

Always wear a respirator and personal protective gear when removing or replacing filters. Lay
the Air Scrubber flat, unlock top latch of the housing, open the inlet panel and remove filters.
- 15 -
- 13 -
CF15
- Activated Carbon Filters are used to remove contaminants and impurities through the
process of chemical absorption. The CF15 captures a wide variety of volatile organic compounds
that includes smoke, food odors, fumes from paint and paint thinners, sewer odors and more. Carbon
Filters can be reused if the adsorbed substances are removed. This process is known as 'regeneration'.
Simply heating the spent carbon at a given temperature for an adequate length of time can regenerate
activated carbon to the point where it can be reused. The CF15 fits the X-2580 model; it is placed
inside the housing in front of the HEPA filter. Always make sure that the Air Scrubber is turned off when
removing the carbon filter. Never use water to clean the CF15 filters. Use vacuum or clean cloth and
lay it flat on a clean and dry surface. For best results, put the CF15 under the sun and leave it there
for a couple of hours. The capacity of the carbon filter will vary widely depending on conditions, but it
should be replaced when a decline of effectiveness is noted.
Precautionary Measure When Cleaning and Changing Filters
An air scrubber captures particles that can be hazardous to human health.
During the process of changing filters, decontamination, or performing
maintenance, large concentrations of captured particles can become
airborne in the immediate area. For these reasons, air scrubber operators
should wear appropriate personal protection equipment (PPE) when
performing any type of service on an air scrubber. A NIOSH-approved
respirator is always essential for these tasks. If you’ve used the air scrubber
for mold remediation or in another environment with known contaminants,
you should also consider wearing gloves, eye protection and coverall
NIOSH-Approved
Respirator Mask
The particles captured by a filter can cause adverse human health effects once they are released into
the air. For this reason, you should dispose of used filters with care. You should place used filters in a
plastic bag and seal the top before disposing. Always follow local regulations before disposing.
Disposal of Filters
The filters may need to be changed after certain period of time depending on your usage and the life of
each type of filters.
All filter accessories are available for purchase directly from XPOWER's headquarters in California.
Please call XPOWER Parts Center at (626) 376-9690 or email to info@xpower.com
Activated Carbon Filter Care for X-2580
Filter Replacement