Air Mover Cage Dryer (Air Mover + Multi Drying Kit) OWNER’S MANUAL XPOWER Manufacture, Inc. 220 Clary Ave. San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax 626-285-3302 www.xpower.
Index Introduction .......................................................................................................................... 2 Operations ........................................................................................................................... 3 Multiple Drying Kit ........................................................................................................... 4~5 Safety Instructions ...............................................................................
Introduction XPOWER Cage Dryers, Air Movers with Multi Drying Kits (MDKs), are specially designed for the professional pet grooming industry. Cage Dryers are offered in two models: X-430TF w/ 430MDK and X-800TF w/ 800MDK. With the most efficient engineering design, professional Level Multifunctional Air Movers X-430TF and X-800TF are ETL/CETL Certified, and also used in many other industies.
Operations Carefully read Safety Instructions (page 6) before starting operations 1. Prior to plugging the unit into the power source, inspect completely for any shipping damage. 2. Carefully place the Air Mover unit on a stable, flat dry surface. 3. Plug the electrical cord into the power outlet. 4. The unit is capable to be used at 4 different angles to direct air flow, except that the unit with handle is at 3 different angles. 5.
Multiple Drying Kit - 430/800 MDK As a Cage Dryer, the Multiple Drying Kit, 430MDK / 800MDK combined with X-430TF / X-800TF is specially designed for professional pet grooming industry.
1) Clamp Air Mover Adapter (A) to air-outlet of the air mover. Make sure the Snap Lock Buckles on both sides of the Adapter are securely locked. 3) At the other end of each Hose (B), attach the Airflow Adjustment Door by using the remaining Hose Clamps (D). 2) Attach each Flex Hose (B) to Adapter (A) by using the Hose Clamp (D). Tighten Hose Clamp (D) with a flat head screwdriver (not included). 4) Use the cage hanger on the Airflow Adjustment Door (C) to place the Flex Hose (B) on a desired cage.
Safety Instructions 1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water. 2. To avoid risk of injury, do not direct air flow at face or any part of body. 3. To reduce the risk of fire or electric shock, do not use the Air Mover with any solid-state speed control device. 4. Use only with GFCI protected receptacles.
Maintenance Instructions 2. Never clean the Air Mover with water directly. When not in use, unplug and store the Air Mover in a dry indoor place out of reach of children. 5. Clean the filters ( for unit with filters) often as necessary to avoid loss of airflow when available.
Specifications M o d el ( A ir M o ver ) X -4 3 0 TF X -8 0 0 TF Volts 115 V / 60 Hz 115 V / 60 Hz M otor 1/3 HP 3/4 HP Airflow 2,000 CFM 3,200 CFM M aximum AM P 3.8 AM PS 7.5 AM PS RPM (L / M / H) 1,000 / 1,350 /1,600 1,100 / 1,250 /1,350 Net / Gross Weight 17 lbs. / 21 lbs. 24.8 lbs. / 29.3 lbs. Unit / Box Dimensions 13.9 x 14.8 x 14.6 / 15.5 x 15 x 15.2 inch 15.9 x 17.5 x 18.5 / 19.3 x 18.7 x 17.
Air Mover Parts List 1 3 2 4-1 & 4-2 6 Timer & Switch Plate 5 7 9 11 13 15 8 10 12 14 16 Capacitor Switch Knob & Timer Knob Filters 15 16 4-2 4-1 16
XPOWER Limited Warranty (USA) XPOWER’s Limited Warranty covers the unit (excludes POWER CORD) from defects in material and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one way shipping. Non-contiguous states must pay for roundtrip freight. A purchase receipt must be provided.
(for US user only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 220 Clary Ave., San Gabriel, CA 91776. Tel: 626-285-3301 Fax: 626-285-3302 (For your convenience, register your product online at xpower.
Air Mover Cage Dryer (Air Mover + Multi Drying Kit) OWNER’S MANUAL XPOWER Manufacture, Inc. 220 Clary Ave. San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax 626-285-3302 www.xpower.ws MDK Models: X-430TF + 430MDK X-800TF + 800MDK Introduction XPOWER Cage Dryers, Air Movers with Multi Drying Kits (MDKs), are specially designed for the professional pet grooming industry. Cage Dryers are offered in two models: X-430TF w/ 430MDK and X-800TF w/ 800MDK.
Index Introduction .......................................................................................................................... 2 Operations ........................................................................................................................... 3 Multiple Drying Kit ........................................................................................................... 4~5 Safety Instructions ...............................................................................
Multiple Drying Kit - 430/800 MDK As a Cage Dryer, the Multiple Drying Kit, 430MDK / 800MDK combined with X-430TF / X-800TF is specially designed for professional pet grooming industry. MDK Attach to Air Mover Use for Cage Dryer (B) (A) (C) The MDK includes: (A) Air Mover Adapter (1) (B) 8 ft Flex Hoses (3) (C) Airflow Adjustment Doors (3) (D) Hose Clamps (6) See next page for MDK installation (D) Safety Instructions 1. To prevent electric shock, do not operate the unit in standing water.
1) Clamp Air Mover Adapter (A) to air-outlet of the air mover. Make sure the Snap Lock Buckles on both sides of the Adapter are securely locked. 3) At the other end of each Hose (B), attach the Airflow Adjustment Door by using the remaining Hose Clamps (D). 2) Attach each Flex Hose (B) to Adapter (A) by using the Hose Clamp (D). Tighten Hose Clamp (D) with a flat head screwdriver (not included). 4) Use the cage hanger on the Airflow Adjustment Door (C) to place the Flex Hose (B) on a desired cage.
Specifications M o d el ( A ir M o ver ) X -4 3 0 TF X -8 0 0 TF Volts 115 V / 60 Hz 115 V / 60 Hz M otor 1/3 HP 3/4 HP Airflow 2,000 CFM 3,200 CFM M aximum AM P 3.8 AM PS 7.5 AM PS RPM (L / M / H) 1,000 / 1,350 /1,600 1,100 / 1,250 /1,350 Net / Gross Weight 17 lbs. / 21 lbs. 24.8 lbs. / 29.3 lbs. Unit / Box Dimensions 13.9 x 14.8 x 14.6 / 15.5 x 15 x 15.2 inch 15.9 x 17.5 x 18.5 / 19.3 x 18.7 x 17.
Air Mover Parts List 1 3 2 4-1 & 4-2 6 Timer & Switch Plate 5 7 9 11 13 15 8 10 12 14 16 Capacitor Switch Knob & Timer Knob Filters 15 16 4-2 16 4-1 (for US user only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 220 Clary Ave., San Gabriel, CA 91776. Tel: 626-285-3301 Fax: 626-285-3302 (For your convenience, register your product online at xpower.
