OWNER’S MANUAL Turbo-Pro (Hi-Temp) Professional Axial Air Mover Model: X-35AR, X-48ATR XPOWER Manufacture, Inc. 240 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax: 626-285-3302 www.xpower.
Index Introduction / Features................................................................................................................ 2 Operation .................................................................................................................................. 4 Specifications ............................................................................................................................ 5 Safety Instructions ...............................................................
Introduction Thank you for purchasing the XPOWER X-35AR and X-48ATR Hi-Temp Turbo-Pro professional axial air movers. XPOWER Manufacture, Inc. has over 25 years of manufacturing experience, bringing a series of products with the most advanced technology in today’s market. Our goal with the X-35 or X-48 Series was to bring an axial air mover never seen before.
VARIABLE SPEED CONTROL SWITCH: An industry first, our completely variable speed control allows you to adjust the fan speed exactly to your liking. This is extremely useful in ventilation applications where precise volume guidelines need to be met. DAISY CHAIN FEATURE: 2 Built-In Outlets allowing multiple units to be connected together.
Operation 1) With the unit unplugged, carefully place the XPOWER unit on a stable, flat, and dry surface. 2) Plug the cord into a grounded G.F.C.I. outlet only, the use of a 3-prong to 2-prong adapter is strictly prohibited. 3) Turn on the switch to make sure the axial air mover is operating correctly. 4) To reduce the risk of injury, close supervision is necessary when an appliance is used near children. Do not allow children to play with or around an Axial Air Mover at any time.
Specifications Model Volt/Frequency Airflow Amps Power Weight Dimensions (LxWxH) Cord Housing Positions Daisy Chain Timer X-35AR 115V / 60Hz X-48ATR 1720 CFM 3600 CFM 1.6 A 2.8 A 1/4 HP 1/3 HP 17.6 lbs 25.6 lbs 18.6x9.4x19.2 inch 21.9x9.8x22.5 inch 20 ft / 14 AWG Injection-molded ABS + PC 360° Rotational Coverage Incl. Incl. N.A. Incl.
Safety Instructions 1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water. 2. To avoid risk of injury, do not direct air flow at face or body. 3. Suitable for use with solid-state speed controls. 4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary. 5. Do not operate any unit with a damaged cord or plug.
XPOWER Limited Warranty (USA) XPOWER’s Limited Warranty covers the unit (excluding POWER CORD) from defects in material and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one way shipping. Non-contiguous states must pay for roundtrip freight. A purchase receipt must be provided.
Maintenance Instructions 1. Always disconnect the axial air mover from its power source before performing any maintenance or cleaning. 2. Never clean the unit with water directly. 3. When not in use, unplug and store the axial air mover in a dry indoor place out of reach of children. 4. To keep the axial air mover clean, use a damp cloth to wipe the surface of the housing.
Parts List Item # 1 4-1 4-2 7 10 13 16 Parts Name Front Air Cover Circuit Breaker Timer (X-48ATR) Handle Speed Control Plate Rear End Cover Rack 5-1 Item # 2 5-1 5-2 8 11 14 17-1 / 17-2 10 7 6-1 8 Parts Name Motor AC Receptacle Timer Knob (X-48ATR) Capacitor PCB Cover Washer / Rack Handle Item # 3 6-1 6-2 9 12 15 18 Parts Name Housing Receptacle Plate Timer Control Plate (X-48ATR) Speed Knob Fan Rear Air Cover Power Cord 17-2 17-1 9 11 4-1 14 2 1 3 12 13 -9- 18 17-1 17-2 16 15 5-2 4-2 6-2
Warranty Registration (for US user only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 240 Clary Ave., San Gabriel, CA 91776. Tel: 626-285-3301 Fax: 626-285-3302 (For your convenience, register your product online at xpower.
TO: XPOWER Manufacture, Inc.
