X-3400A, X-3500, X-3700 OWNER’S MANUAL XPOWER MANUFACTURE, INC.
Index Introduction...............................................................................................................................2 Operation Instructions..............................................................................................................3 Safety Instructions......................................................................................................................4 Maintenance Instructions/Troubleshooting....................................................
Introduction Introducing XPOWER’s unique and highly innovative air scrubbers: X-3400A, X-3500 & X-3700. Using the advanced technology 4-stage filtration system that includes a washable outer round nylon mesh, an inner nylon mesh, pleated media filter, HEPA and activated carbon filters – you can be sure the XPOWER Air Scrubbers can contain ground-water contaminants that lead to environmental and human toxicity.
Operation In order to remove airborne particles from the surrounding environment, XPOWER Air Scrubbers are designed to draw air through a series of filters and deliver the purest air. Each filter stage operates with progressively higher efficiency. The unit removes airborne particles like hair, skin flakes, visible dust, mold spores, pollen, pet dander and miscellaneous debris. 1. XPOWER Air Scrubbers are shipped ready-to-use.
Safety Instructions 1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water. 2. To avoid risk of injury, do not direct air flow at face or body. 3. Use only with GFCI protected receptacles. Please contact a qualified electrician for verificaton and / or installaton of a GFCI receptacle if necessary. 4. Do not operate any unit with a damaged cord or plug.
Maintenance Instructions 1. To keep the Air Scrubber clean, use a damp cloth to wipe the surface of the housing. 2. Never clean the Air Scrubber with water. 3. W hen not in use, unplug and store the Air Scrubber in a dry indoor place out of reach of children. 4. Always disconnect the Air Scrubber from its power source before performing any maintenance or cleaning. Filter Replacement Always wear a respirator and personal protective gadgets when removing or replacing filters.
SYMPTOM POSSIBLE CAUSE ACTION Make sure unit is plugged in and switch is turned to Switched off Motor not running ON mode Power failure Check outlet/change to another outlet Wiring failure Contact XPOWER for service/repair.
Specifications Model Volt / Frequency X-3500 X-3400A X-3700 115V / 60Hz 115V / 60Hz 115V / 60Hz Power 220W 220W 220W Amp 2.8 Amp 2.3 Amp 2.3 Amp Rated Airflow (On High) 600 CFM 550 CFM 550 CFM Speed Variable Speed Variable Speed Variable Speed Unit Weight 28.8 LBS 33.5 LBS 31.8 LBS Unit / Box Dimensions 19.6" x12.3" x 21.6” / 19.6" x 12.3" x 21.6" / 18.5" x 12.3" x 21.6" / (L x W x H) 21.3" x 14" x 23" 20" x 12.7" x 22" 21.
X-3400A Parts list Item No. Parts Name Item No.
Accessories X-3400A GFCI Daisy Chain XPOWER X-3400A Air Scrubber is GFCI daisy chainable with a low 2.8 amp draw. The 12-amp on-board circuit breaker will allow three (3) additional X-3400A units to run on one circuit at the same time. X-3400A Air Scrubber has an on-board Circuit Breaker. If the Auxiliary Outlet overloads, the Circuit Breaker will trip. If the Breaker does trip, unplug the units and press the Circuit Breaker Reset button. Plug the units back into the power source and turn on the switch.
Filter Description X-3400A 3-STAGE FILTER SYSTEM 1st stage - Nylon Mesh Filter 2nd stage -Pleated Media Filter 3nd stage -2" Thick HEPA Filter X-3500 4-STAGE FILTER SYSTEM 1st stage - Outer Nylon Mesh Filter 2nd stage - Nylon Mesh Filter 3nd stage - Activated Carbon Filter 4th stage -1.
12” Ø I.D. 16”x16” 16”x16” 16”x16” 16”x16” Outer Nylon Nylon Pleated Activated HEPA Filter Mesh Filter Mesh Filter Media Filter 13 Carbon Filter 1.
XPOWER Limited Warranty (USA) XPOWER’s Limited Warranty covers the unit (excludes POWER CORD) from defects in material and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one way shipping. Non-contiguous states must pay for roundtrip freight. A purchase receipt must be provided.
WARRANTY REGISTRATION (for US customers only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 220 Clary Ave., San Gabriel, CA 91776.
From: ________________________ ________________________ ________________________ TO: XPOWER MANUFACTURE, INC.
