TM PROFESSIONAL AIR MOVER OWNER’S MANUAL X-800 / X-800H / X-830 / X-830H P-800 / P-800H / P-830 / P-830H XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax: 626-285-3302 www.xpower.
Index Introduction ............................................................................................................................... 2 Operation / Instructions.............................................................................................................. 3 Safety Instructions...................................................................................................................... 4 Maintenance Instructions / Troubleshooting...........................................
Introduction XPOWER Air Movers are Certified Professional Level Multifunctional Air Movers with the most efficient engineering design. Features: • Low power draw with high velocity air flow from 3,300 to 3600 CFM • Super quiet motor and super lightweight • Easy carrying handle and stackable up to 4 units high. • Easy and quick to disassemble for thorough cleaning and service. • Power cords lengths are 20’ for P models and 25’ for X models. • Easy cord wrap on handle.
Operation / Instructions XPOWER Air Movers are intended to move air and to dry floors, walls, furniture, etc. Durable and easy to operate with an effective balance of static pressure and airflow, the units are suitable for a variety of applications. 1. XPOWER Air Movers are shipped ready-to-use. Prior to plugging the unit into the power source, inspect completely for any shipping damage. 2. Plug the electrical cord into the power outlet. 3. Carefully place the Air Mover unit on a stable, flat dry surface.
Safety Instructions 1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water. 2. To avoid risk of injury, do not direct air flow at face or body. 3. To reduce the risk of fire or electric shock, do not use the Air Mover with any solid-state speed control device. 4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.
Maintenance Instructions 1. To keep the Air Mover clean, use a damp cloth to wipe the surface of the housing. 2. Never clean the Air Mover with water. 3. W hen not in use, unplug and store the Air Mover in a dry indoor place out of reach of children. 4. Always disconnect the Air Mover from its power source before performing any maintenance or cleaning. Troubleshooting For any problems not listed below, call your local distributor or contact our Service Department.
Specifications Model P-800 / X-800 P-800H / X-800H P-830 / X-830 P-830H/X-830H 115V, 60Hz 115V, 60Hz 115V, 60Hz 115V, 60Hz 3/4 HP 3/4 HP 1 HP 1 HP 7.5 Amps 7.5 Amps 8.5 Amps 8.5 Amps 23 Lbs. / 24.5 Lbs. 26 Lbs. / 27.5 Lbs. 24 Lbs. / 25.5 Lbs. 27 Lbs. / 28.5 Lbs. Three Three Three Three Size (L x W x H) 15.9 x 17.5 x 18.5 in. 15.9 x 18.7 x 18.7 in. 15.9 x 17.5 x18.5 in. 15.9 x 18.7 x 18.7 in. Handle / Wheels N.A. YES N.A. YES Cord Length 20 Ft. / 25 Ft. 20 Ft. / 25 Ft.
XPOWER LIMITED WARRANTY XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one way shipping. The XPOWER Air Mover Housing is covered for a term of five years from the date of original purchase.
800 Series Parts List Item No. 800-1 800-3 800-5 800-7 800-9 800-11 800-13 800-15 Parts Name Left Housing Switch Plate Switch Plate Right Housing Fan Air Outlet Grid Cover Rubber Feet (Not Shown) Capacitor Item No.
Accessories Luggage Handle & Wheels (for 800T and 830T models) XPOW ER Air Mover Model Nos. P-800T, P-830T, X-800T & X-830T comes with built-in adjustable luggage handle and wheels for easy transport and mobility. .
WARRANTY REGISTRATION Please complete and mail or fax for your product warranty. For a multiple of Address: please list serial numbers on a separate sheet paper MANUFACTURE, INC.
From: ________________________ ________________________ ________________________ TO: XPOWER MANUFACTURE, INC.