Quick Start Guide

Product introduction
Product Name: Star Machine
Charging input: 5V 1A
Battery: Built-in7.4V/1000mAh lithium battery
Printing method: thermal printing
Product Size: 86x86x41.2mm
Print speed: MAX 9mm/s
Supplies speciflcations: 57x30mm
Working environment: Temperatture: 0~45°C
Humidity: 10~80%
operating system: Android/IOS
Key Functions
Power switch
USB interface
Power switch
USB interface
·Perss and hold for 2 seconds to turn on or off;
·double click to find the QR code.
·Charge only
Note: lf you use the device for the first time or if you are idle for a
long time,you may not be able to turn it on because the battery is
low. Please charge it for at least half on hour before turning it on!
Open key indicator status
At boot time
Steady on: Normal state; Fast flash: Printer is abnormal
When shutting down
Slow flashing: Charging, full backlight
3. Open the APP, scan the QR code printed in step 1, and
connect to Bluetooth. If the connection is successful, you
can use APP to print.
Cover open button
Download on the
App Store
GET IT ON
Google Play
Download APP
Installation steps
1. the first use, long press the star machine to open the key
2 seconds to boot, double-click to open the key after booting,
the star opportunity automatically print out the QR code.
2. Search for “Star Machine” in the application store or scan
the QR code in the figure below to download and install the
Star Machine APP. During the installati on process, the
application is allowed to obtain the relevant permissions of
the mobile phone, register the account and log in.
Quick start guide
Sta rmac hine
Qui cks tar tgu ide
Star machine
PackingList
USB data cable
Product warranty card
Product name : _______________________
Product model : _______________________
Product numler : _______________________
Date of purchase : _____________________
Warranty period: From the date of purchase, our company
provides one-year warranty service.
The following situatuons will not be provided free warranty:
·Unauthorized disassembly of repair products
·Product barcode, fragile sticker damage and warranty card
alteration and defect.
·Failure to operate the equipment in accordance with the
instructions.
·Damage caused by water ingress or falling.
·Due to force majeure caused by failure or damage.
·Outside the warranty period.
Contact number: 0756-2897617
Company Address: 307-2, Zhonglixing Building, No. 4
Xingguo Street, Xiangzhou District, Zhuhai