XRA370504 X10 2018 Manual

17
LONG
SHORT
ALTERNATIVE 2 - LONG SHOCKALTERNATIVE 1 - SHORT SHOCK
(INITIAL SETTING)
5mm
5mm
Press the collar FULLY onto the end of the
shock shaft and tighten the M3x3 setscrew.
Press the collar FULLY onto the end of the
shock shaft and tighten the M3x3 setscrew.
For initial setting,
thread fully.
For initial setting,
thread fully.
ADAPTOR
5. SHOCK ABSORBER
901303
SB M3x3
For the LONG shock alternative, use the shock adaptor.
901303
SB M3x3
By using longer or shorter shock, the damping and steering characteristics can be changed.
SHORT SHOCK:
Shock is built WITHOUT adaptor.
Front mount is REARWARD.
Improves steering response, quicker direction changes.
LONG SHOCK:
Shock is built WITH adaptor.
Front mount is FORWARD.
Improves driveability over bumps, improves on-power traction.
The length of the shock absorber affects the amount of rear downstop. To adjust, thread the ball-joint on or off
the threaded post on the bottom spring cap.
DOWNSTOP ADJUSTMENT
SHOCK
DOWNSTOP