XRA320005 XRAY XB2 2019 Manual

32
VELCRO™ TAPE WITH DOUBLE-SIDED TAPE
2x
L=R
(Velcro™ tape - hook side) (Velcro™ tape - soft side)
➍
Before cutting and making holes on the BODY, put the unpainted body on the chassis to
confirm the mounting position and location for holes and cutouts. Before cutting and making
holes on the WING, put the unpainted wing on the wing holders to confirm the mounting
position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry
thoroughly.
Mask all windows.
The foam battery spacer can be installed
either in front or behind the battery.
REAR BATTERY POSITION (INITIAL SETTING):
Foam spacer in front of battery.
More traction on rear suspension, less steering
FRONT BATTERY POSITION:
Foam spacer behind battery.
Less traction on rear suspension, more cornering speed
➊
➋
➌
➎
➏
➐
➑
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
BODY REAMER (HUDY #107600)
Battery
(NOT INCLUDED)
Foam spacer (INITIAL SETTING)
7. FINAL ASSEMBLY
BATTERY STRAP
#326110 GRAPHITE OPTION
#326111 COMPOSITE INCLUDED
LESS TRACTION MORE TRACTION
BATTERY WEIGHT
#326180 50g OPTION
#326181 35g OPTION
XRAY LEXAN BODY
#329700 0.75mm OPTION
#329701 0.50mm OPTION
#369706 0.50mm ALPHA OPTION
#329707 0.75mm BETA INCLUDED
#329708 0.50mm BETA OPTION