2022 XB2 Off-Road Buggy - Manual

DIRTDIRTCARPET
42
7. FINAL ASSEMBLY
➍
Before cutting and making holes on the BODY, put the unpainted body on the chassis to
confirm the mounting position and location for holes and cutouts. Before cutting and making
holes on the WING, put the unpainted wing on the wing holders to confirm the mounting
position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry
thoroughly.
Mask all windows.
➊
➋
➌
➎
➏
➐
➑
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
903308
SFH M3x8
REAR WING SHIM
#293561 SILVER OPTION
#293561-O ORANGE OPTION
#293561-K BLACK OPTION
XRAY LEXAN REAR WING
#323510 1.0mm OPTION
#323511 1.5mm OPTION
#323513 1.0mm RANK INCLUDED
#323517 1.0mm TEC INCLUDED
#363510 1.0mm OPTION
#363511 1.5mm OPTION
#363512 2.0mm OPTION
XRAY LEXAN CENTER FIN
#323515 1.0mm ZAP OPTION
CARPET
DIRT
XRAY LEXAN BODY
#329701 0.50mm OPTION
#329709 0.50mm ALPHA 2 OPTION
#329710 0.75mm GAMMA 2D INCLUDED
#329711 0.50mm GAMMA 2DL OPTION
#329712 0.75mm GAMMA 2C INCLUDED
#329713 0.50mm GAMMA 2CL OPTION
CARPET
DIRT
DIRT
CARPET