Instruction Manual

#358709 ALU MONOBLOCK ENGINE MOUNT - SWISS 7075 T6
The XRAY Alu Adjustable Engine Mount provides not only solid
engine mounting and easy adjustment, but its unique keyed-
mount design allows you to remove and replace the engine
without having to re-adjust gear mesh. Adjust the mesh once only!
The engine mount assembly consists of two pieces: the adjustable
base which is affixed to the chassis, and the upper mounts which
are attached to the engine. The single-piece engine mounts allow
easy access to the rear cover of the engine so you do not have to
disassemble the mounts at any time.
The 1-pc lower base is universal, with a pair of engine mounts
available separately to fit various engines:
#358718 - for FX/Novarossi/Max/Sirio engines
#358919 - for Picco/Reds/Orion/LRP/OS, Ultimate Racing engines
➊ Remove the screws attaching the upper mounts to the base.
➋ Remove the engine (with the attached upper mounts); the
base remains attached to the chassis.
➌ Perform maintenance on the engine; keep the upper
mounts attached to the engine.
➍ Reinstall the engine. Key the upper mounts to the lower
base, install the screws, and then tighten the screws
securely.
➊ Attach the engine to the upper mounts.
➋ Attach the upper mounts (with the engine) to the lower
base.
➌ Attach the lower base to the chassis, adjust the gear mesh,
then tighten the base to the chassis.
INSTALLING THE ENGINE:
REMOVING & REINSTALLING THE ENGINE:
If you have any questions, please do not hesitate to contact XRAY at [e-mail] or visit our website at www.teamxray.com for
news and updates.
#358718 ALU STAND FOR ENGINE MOUNT - FX, NOVAROSSI, MAX, SIRIO
#358719 ALU STAND FOR ENGINE MOUNT - PICCO, REDS, ORION, LRP, OS, ULTIMATE RACING
#358709
#358719
#358718
DETAIL
ADJUST THE GEAR MESH
Only for the first time.
4x10
3x12
3x12
Before tightening, make sure that the
gear mesh is set properly. For more
information about engine adjustment,
see the XRAY XB8 Instruction Manual.