User Manual

Right-click “Run setup.exe” and “run as administrator”. Follow the on-screen instructions.

When prompted, enter the serial number for the product. This number can be found on the

letter accompanying the MT SDK CD-ROM. User the default installation folder or select

preferred installation folder, and click next.

6.2 Connecting to MT Manager

To initialize the Awinda Station and MTw’s, dock the MTw’s in the Awinda Station. Physically

connect the Awinda Station, to the PC using the USB cable provided.

6.2.1 Automatic COM Port Scanning

Upon execution of the MT Manager, all available COM ports on the host PC are

automatically scanned for Xsens hardware. Progress is displayed during scanning in the

status bar on the bottom right corner of the main window. If the PC has a large number of

COM-ports (e.g. if Bluetooth drivers are installed) this may take some time.

Upon successful connection

, the “Device List” sub-window appears with a list of connected

devices and respective Device ID number (when necessary press the Device List icon).

The Wireless Configuration section (6.4.2) describes how to connect the MTw’s as sub-

systems (clients) of Awinda.

NOTE: If synchronisation configuration is needed first enable these settings (See section 6.7)

before carrying out the wireless configuration.

Please refer to Section 8 in case of problems.