User Manual

© Xsens Technologies B.V.
21
If the automatic scanning at start up does not reveal any connected devices, ensure that
there is a USB connection and manually scan for ports using the functions in the connectivity
toolbar.
6.3 Connectivity Toolbar
The following items are available on the connectivity toolbar, for manual COM port
scanning/disconnecting.
Scan all ports
Scan single port
Disconnect COM port
1
6.3.1 Scan All Ports
All available COM ports are scanned for connected devices.
6.3.2 Scan Single Port
Choose an active COM port from the appropriate drop down menus to link this port to MT
Manager, click “Scan single port”.
6.3.3 Disconnect COM Port
To disconnect all hardware connected, select the “Disconnect” button.
1
This can also be used to close an open file.