User Manual

© Xsens Technologies B.V.
24
6.5 Wireless Configuration
When the Awinda Station is connected to the MT Manager, the Awinda system can be in one
of the following states:
State
Description
Connecting
The Station is plugged into the USB connection and MT Manager tries to
establish the link to the Station.
Connected
The Station is plugged in to the USB and detected by MT Manager. The radio
is not transmitting.
Enabled
The station is broadcasting (i.e. radio enabled) on the specified channel and
MTw’s can detect this transmission and connect. MTw’s that connect but
should not be part of the configuration can be rejected.
Operational
All the necessary MTw’s are connected and no more new MTw’s can connect.
The system is ready to start the measurements using the indicated maximum
frame rate or the user can specify a lower one.
Measuring
The MTw’s are measuring and transmitting data to the station. The station
relays the measurements to MT Manager.
Recording
Any missed data packets are retransmitted in this state, provided that the
maximum update rate is not selected.
The state transition diagram is illustrated below: