User Manual

© Xsens Technologies B.V.
44
Problem
Possible cause
Solution
found in the Device
List.
it.
Re-entering wireless
network after out of
range, MTw(s) not
detected in MTM.
MTw and Awinda Station lost
wireless connection for an
undesired length of time.
Re-dock the MTw(s) perform
Wireless configuration step again
(Section 6.4.2).
Re-enable radio
does not always
find trackers used
before.
Re-dock the MTw(s), rescan ports
and perform Wireless
configuration step again (Section
6.4.2).
RSSI in Wireless
configuration is full,
while I cannot
receive data from
the MTw.
MTw and Awinda Station no
longer wirelessly connected.
Re-dock the MTw(s) perform
Wireless configuration step again
(Section 6.4.2).
MTw in Wireless
Configuration is
shown as
disconnected, but
RSSI appears to
have a good
strength.
MTw and Awinda Station are not
wirelessly connected.
Related to above issue.
Re-dock the MTw(s), rescan ports
and perform Wireless
configuration step again (Section
6.4.2).
A discrepancy of a
sample count is
detected between
MTw’s at the
beginning or end of
an exported file.
Due to the nature of wireless
transmission, this may occur.
Always allocate exported data to
a given sample count.
NB - also to prevent possible
problems of missing samples.