User's Manual

Document MV0319P.N

MVN User Manual

Figure 25: Example of camera configuration window

If no pictured is displayed, if the image is jagged, or no camera is found, install the dedicated driver,

found in C:\Program Files\Allied Vision Technologies. You may have to restart MVN Studio for the

camera to be found after this is installed. If no video data is displayed, check or uncheck the Use jumbo

packets option to resolve the issue. The camera needs be connected to the dedicated ethernet port on

the pc, whereas the internet connection can use the USB to Ethernet adapter.

You may select to check the Auto Gain box or manually adjust the gain of the video yourself in this

window.

7.4 Define X-Axis

MVN Studio uses magnetic north as positive X-axis, inserting this configuration means that it is possible

to define the X-axis, an additional calibration step will be needed, in which the direction the subject is

facing defines the new X-axis. In a setup with multiple MVN systems, the first system in the list of the

‘Setup pane’ needs to perform the calibration.