User's Manual

Document MV0319P.N

MVN User Manual

Note: in MVN Studio, height is indicated by ‘Z’.

Figure 49: Set position menu during contact point editing

The SD slider sets the standard deviation, which is an indication of how much the aiding point can be

trusted in combination with the computed position of the MVN Fusion Engine. This option can also be

used creatively for example to create a “soft” landing on a mattress. With the ‘Force no contacts’ options,

no other contacts will be detected during the selected frames. The contact bar will show a dot in the

center of the edited frame and mark all other contact points dark. The ‘Absolute’ option completely

overrules the computed position of the MVN Fusion Engine. The contact bar will show a ‘P’ at the

selected frame. After editing the co-ordinates, click the reprocess button.

Always work chronologically when setting positions of contact points, since an edited position at frame

k will influence the position at frame k+1 and further.

Figure 50: Example of using contact point aiding for seated position