User's Manual

Document MV0319P.N

MVN User Manual

14 MVN Ethernet Camera

MVN Studio 3.0 has the ability to record synchronized MVN and video data. This is possible using the

Ethernet camera (Prosilica GS650) provided with the PRO system. The camera is a high quality

professional GigE camera with a C mount. The GigE interface enables the use of long cables (max

100m) and standard 1 Gigabit Ethernet cards for interfacing. The currently supported frame rate in MVN

Studio is limited, but the camera itself is capable of 120 frames per second (fps), depending on lighting

conditions. The camera has a global shutter and is capable of advanced triggering and synchronization

features.

14.1 Using the MVN camera GS650

The MVN camera GS650 has the following components, which you will need to know to connect to your

PC.

Figure 60: Interface and connections drawing of the MVN camera GS650.

1. Gigabit Ethernet interface, IEEE 802.3 1000BASE-T conformant, CAT5E or CAT6 recommended,

max 100m.

2. GPIO port – Power supply

3. Status LED 1

a) Solid Orange, link established

b) Flashing Orange, data transmission, activity

4. Status LED 2

a) Solid Green, normal operation

b) Flashing, 1 Hz, booting

c) Flashing, 3x quickly @ 1 Hz, error

To use the MVN Camera, connect the power supply to the mains power (Slot 2 of Figure 60) and connect

the network cable (Slot 1 of Figure 60) to the MVN Camera and to the network slot of the PC or laptop.