User's Manual

Hole of mic
USER MANUAL
The touch
Type-C
charger
Lights of
earbuds
Lights of
charging
box
Left
Right
Charging box
Specification
Charger cable
1.Product Component Name
5.Technical Specification
Earphone
Charging Box
Charging Times 4 Times
Bluetooth Specification
Bluetooth5.0
Bluetooth Profile
A2DP1.3/AVRCP1.6/HSP1.2/HFP1.7
RF Range
15M
Talking Time
4H
Standby Time
150H
Charging Time
About 1.5H
Battery Type
Polymer li-ion battery3.7V/45mah
20HZ-20KHZ
Distortion
≤1%
Frequency Response
Battery type
Polymer li-ion battery3.7V/500mah
Charging time
About 2H
3) Why does the earphone stuck suddenly?
Ans:Bluetooth signal is vulnerable to electromagnetic
interference, which leads to stuck.
6.Customer Service Support
1) Why does an earbud silent?
Ans: Please turn off or clear the pairing list of
earbuds and reconnect them.
7.FAQ
If you need to return or change the goods, please
contact customer service :[e-mail]
2) How to use the earbuds separtely?
Ans: The left earbuds can be connected with the BT of
the cellphone when it turns on. The right earbuds
can be connected with the BT of the cellphone
after clicking the touch for five times when the
connection is cut off between the left earbuds
with the right earbuds.
Warm tips: The left earphone is the main earphone,
put the cellphone in the left pocket or hold in the left
hand for a more stable connection experience
8.Harmful Substances
Component
Shell
Circuit Board
Hazardous Substance
Pb
Hg
Cd
Cr/VI
PBB
PBDE
The form is compiled according to SJ/T11364
Indicates that this hazardous substance contained in all
homogeneous materials of this part is below the limit
requirement in GB/T 26572.
Indicates that this hazardous substance contained in at
least one of the homogeneous materials of this part is
above the limit requirement in GB/T 26572
Ten years environmental protection service life
This product meets RoHS environmental
protection requirements. it will not affect
the health of users under normal use.
(At present, there is no mature technology in
the world to replace or reduce lead content in
electronic ceramics, optical glass, steel and
copper alloys.)
3.Frequently Function
Pairing/Connect
earbuds pairing mode:
Open the charging box or touch 2s
cellphone connect successfully：
Open the cellphone and connect it when the
white light of the earbud flickered once for 10s
Answer/reject calls:
answer：
In an incoming state, click “the touch”
reject：
In an incoming state, touch 1s
turn on:
Open the charging box or touch 2s
power off:
Turn off the charging box or touch 10s
Next
Bouble-click the right earbud to change
next song
Turn on/Power off
Activate voice assistant
In the connection state, triple-click “the touch”
Previous
Bouble-click the left earbud to change
previous song
4.Charge
Red light on
Red light
went out
White light on
White light flashing
Mic switching
Note:Before the operation, make sure there is no connection
between the left and right earbuds
Mic in a call state, double-click “the touch”
which can switch mobile mic and earbuds mic
Low battery indication
When in low battery, red light will slow flash
every 5s, please recharge in time
Clear pairing list
When the left and right earphones turn on solely,
click 5 times to enter the pairing mode and then
click 7 times again , the red light will be on for one
second before shutdown
110
m
m
±
0.2m
m
69mm±0.2mm
When white light flickered for 10s once of the
left and right earbuds, paired with the phone
successfully
Open the charging box and reconnect it automatically
Matching After The Second
4
2.First Time Pairing and Use
Open the cellphone Bluetooth directly and
search “X-Buds” to match and play
Open the charging box, wait for 2 seconds, the
earbuds automatically enters the pairing mode
simultaneously
When the red and white lights of the left earbud
flash alternately, meanwhile, the right earbud lights
out and the white lights flash once for 10s, cellphone
pairing successfully
Settings
Bluetooth
X-Buds
88%
11:14 AM
AT&T 4G
Bulet ooth
Now discov era ble as“iphon e”。
MY DEVICES
Not connected
OTHER DE VICE
X-Buds
设计承认 客户承认
T6说明书/69X110mm/5折页/100g双铜纸/彩色双面印刷
设计 ：
品质审核：
批准：
审核：
版本记录
文件名称：
ERP物
料
描
述
：
工艺要求：
确认：
供应商名称：
环保要求：
RoHS Reach
其它
物
料
描
述：
外观 刀模尺寸 颜色 丝印/镭雕 材质 电镀 喷油 产品尺寸参考中性 其它
文件抄送：IQC [X2] 文控[X1] 供应商 [X1]
模板版本：R3.0/2017
T6说明书_西柚
5折页\100g铜版纸\彩色双面印
PROP65 PAHS
AZO
T6说明书/69X110mm/5折页/100g双铜纸/彩色双面印刷
常德沁音科技有限公司
(20HZ-10KHZ 1mW)
背面
正面
2019-4-23
R 1. 0初版
2019-4-24
R 2. 0修改排版
2019-5-8
R 3. 0修改充电盒灯图标
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received,
including interference that may cause undesired
operation.
The left earbud FCC ID:2AALPT6L
The right earbud FCC ID:2AALPT6R
2019-5-21 删除西柚LOGO
2019-6-13
增加FCC警示语以及ID号