Stereo Amplifier 2200ix

ON-BOARD ELECTRONIC CROSSOVER

The 22001X features a three-way electronic crossover. The

crossover is tied to a set of inputs and controls the frequency range

of the associated Channels. Independent frequency selection is provided for

both the High and Low Pass sections. Aset of selectable RCAline outputs (to

feed additional components) are included with the crossover. In addition, the

crossover features two on-board header jumpers (one for the amplifier and

one for the RCAline outputs) which allows you to select Bypass (Full Range),

High Pass, Low Pass, and/or Band Pass mode. When chosen, the Band Pass

selection is

available via the Low Pass jumper position for the RCA line out-

puts.

The following Frequency Modules (SIPs)* are available from your Xtant

Dealer: 50 Hz, 70 Hz, 80 Hz, 90 Hz, 120 Hz, 150 Hz, 300 Hz, 500 Hz, 700 Hz,

1 kHz, 3 kHz, 4 kHz, and 5 kHz.

Please refer to the Installer’s Reference (insert) for the Frequency Module recep-

tacle(s) location and chart of frequency/SIP value code numbers

* SIP: an acronym referring to multiple resistors in a Single In-Line Package