SB2.
Congratulations On Your New Bike and Welcome to the XTERRA Fitness Family! Thank you for your purchase of this quality fitness bike from XTERRA Fitness. Your new fitness bike has been manufactured by one of the leading fitness manufacturers in the world. XTERRA Fitness will do all we can to make your ownership experience as pleasant as possible for many years to come. If you have questions, or if parts are missing or damaged, or you require customer service, call (870) 336-4286.
Product Registration Purchase Location Purchase Date Record Your Serial Number Please record the Serial Number of this fitness product in the space provided below. Serial Number Register Your Purchase The self-addressed product registration card must be completed in full and returned to XTERRA Fitness. You can also go to www.xterrafitness.com/warrantyreg.html to register online. Power This product uses an external power supply.
Important Safety Instructions When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock: 1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING - To reduce the risk of burns, fire electric shock, or injury to persons: 1. An appliance should never be left unattended when plugged in.
SB2.5r Assembly Pack Checklist Hardware Step 1 #32. 5/16” x 3/4” Button Head Socket Bolt (11 pcs) #33. 5/16” Flat Washer (10 pcs) #34. 5/16” Curved Washer (1 pc) #35. 5/16” Split Washer (11 pcs) #41. M5 x 12mm Phillips Head Screw (4 pcs) Hardware Step 2 #32. 5/16” x 3/4” Button Head Socket Bolt (8 pcs) #33. 5/16” Flat Washer (4 pcs) 3 #35. 5/16” Split Washer (4 pc) SB2.
Hardware Step 3 #55. M6 x 35mm Phillips Head Screw (4 pcs) #61. 3/8” x 1-3/4” Button Head Socket Bolt (6 pcs) #62. 3/8” Flat Washer (6 pcs) #63. 3/8” x 7T Nyloc Nut (6 pcs) Assembly Tools #68. Combination M5 Allen Wrench & Phillips Head Screw Driver #92. M6 L Allen Wrench SB2.5 Recumbent Bike 4 #69.
SB2.5r Assembly Instructions 1 Frame, Console Mast & Console Hardware Step 1 #32. 5/16” x 3/4” Button Head Socket Bolt (11 pcs) #33. 5/16” Flat Washer (10 pcs) #34. 5/16” Curved Washer (1 pc) #35. 5/16” Split Washer (11 pcs) #41. M5 x 12mm Phillips Head Screw (4 pcs) 1. First, connect Hand pulse Wire (Middle) (108) and Hand pulse Wire (Upper) (94).
2 Handlebars, Pedals & Stabilizer Tubes 1. Use the M5 Allen Wrench (68) to secure the front and rear stabilizers (5 & 6) on the mounting brackets with four Button Head Socket Bolts (32), four split washers (35), and four flat washers (33). 2. Use 14/15mm Wrench (69) to tighten the pedals (15 left and right) to the crank axle. The left pedal is a reverse thread and will screw in a counterclockwise direction. The pedals are marked with an R or L on the end of the threaded pedal axle.
3 Seat & Rear Handlebars Hardware Step 3 #55. M6 x 35mm Phillips Head Screw (4 pcs) #61. 3/8” x 1-3/4” Button Head Socket Bolt (6 pcs) #62. 3/8” Flat Washer (6 pcs) #63. 3/8” x 7T Nyloc Nut (6 pcs) 1. Secure the Seat (19) on the sliding seat carriage with four Phillips head screws (55).Tighten with the Combination M5 Allen Wrench & Phillips Head Screw Driver (68).
Operation of Your Console SB2.5 Console Key Functions START / STOP: 1. Starts & Pauses workouts. 2. Starts body fat measurement. 3. Holding key for 3 seconds will reset all functions and values to zero. DOWN: Decreases value of selected workout parameter: TIME, DISTANCE, etc. During the workout it will decrease the resistance load. UP: Increases value of selected workout parameter. During the workout it will increase the resistance load. ENTER: To input desired value or work out mode.
Functions SPEED: Displays current training speed. Maximum speed is 99.9 KM/H or MILE/H. RPM: Displays current pedal rotations per minute. TIME: Accumulates workout time from 00:00 to 99:59. Or users can preset the target time desired. DIST: Accumulates the workout distance form 0.00 up to 999.9 KM or Mile. Or users can preset the target distance they want to reach. ODO: Displays the total accumulated distance from 0.0 to 999.9KM or Mile. CAL: Accumulates the calories burned from 0 to 9999.
More About Workout Parameters Parameter Setting Range Default Value Increment / Decrement Time 0:00 - 99:00 00:00 ± 1:00 Distance 0.00 - 999.0 0.00 ± 1.0 Calories 0 - 9995 0 ±5 Watt 40-250 100 ±5 Age 10-99 30 ±1 Pulse 60-220 90 ±1 SB2.5 Recumbent Bike 10 Description 1. When display is 0:00, Time will count up. 2. When Time is 1:00 - 99:00, it will count down to 0:00. 1. When display is 0.00, Distance will count up. 2. When Distance is 1.0 990.0, it will count down to 0.00. 1.
Program Operation Manual Program Setting Parameters for the Manual Program Select Manual using UP / DOWN KEY then press the ENTER KEY. The first parameter, “Time” will flash so value can be adjusted using UP / DOWN KEY. Press ENTER KEY to save value & move to next parameter to be adjusted. **(If user sets up the target time to workout then the next parameter of Distance can not be adjusted) Continue through all desired parameters, pressing START / STOP to start workout.
Pre-Set Programs (P2 - P13) SB2.
Watt Control Program Setting Parameters for Watt Control Programs Select Watt Control Program using UP / DOWN KEY then press ENTER KEY. The first parameter “Time” will flash indicating the value can be adjusted using UP / DOWN KEY. Press ENTER KEY to save value & move to next parameter to be adjusted. **(If user sets up the target time to workout, then the next parameter of Distance can not be adjusted) Continue through all desired parameters, pressing START / STOP to start workout.
User Program Four User Programs allow the user to create their own personal programs. Setting Parameters for User Programs Select “User” using UP / DOWN KEY then press ENTER KEY. The first parameter, “Time” will flash indicating the value can be adjusted using UP / DOWN KEY. Press ENTER KEY to save value & move to next parameter to be adjusted. **(If user sets up the target time to workout, then the next parameter of Distance can not be adjusted) Continue through all desired parameters.
Heart Rate Training Programs There are two ways to communicate your heart rate to the console. Use the contact heart rate grips and keep a consistent and firm grip, or buy an optional heart rate strap that transmits your pulse wirelessly to the console. The heart rate strap is a more accurate measurement of your actual heart rate. Wearing The Chest Strap 1. Attach the transmitter to the elastic strap using the locking parts. 2.
Target Heart Rate Program Setting Parameters for the Target Heart Rate Program Select Target HR using UP / DOWN KEY then press ENTER KEY. The first parameter “Time” will flash indicating the value can be adjusted using UP / DOWN KEY. Press ENTER KEY to save value & move to next parameter to be adjusted. **(If user sets up the target time to workout, then the next parameter of Distance can not be adjusted) Continue through all desired parameters, pressing START / STOP to start workout.
Manufacturer’s Limited Warranty Effective August 1, 2012 - BIKE LIMITED WARRANTY XTERRA Fitness Inc. warrants all its home use bike parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date.
3000 Nestle Road Jonesboro, AR 72401 www.xterrafitness.com - Phone:870-336-4286 ©2013 All RIghts Reserved. - Fax:870-935-7611 SB2.