Operation Manual

Xterra SB440r Bike
14
Power up
The Bike is supplied with an external power supply. When power is connected to the Bike, the
console will automatically power up. If there is no input to the console for 20 minutes the console
will go to stand-by mode to save energy. To turn the console on press any key.
When initially powered on the console will perform an internal self-test. During this time all the lights
will turn on. When the lights go off the dot matrix display will show a software version (i.e.: VER 1.0)
and the time and distance windows will display an odometer reading. The odometer reading
displays how many hours the bike has been used and how many virtual miles the bike has gone.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different workout profiles of the
programs and operating instructions. You may now begin to use the console.
Operation of Your Bike Console