TR600 TREADMILL OWNER’S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL
Table Of Contents Product Registration 1 Important Safety Instructions 2 Important Electrical Instructions 3 Important Operation Instructions 4 TR600 Assembly Instructions 6 Operation of Your Console 11 Programmable Features 15 Heart Rate 17 General Maintenance 19 Manufacturer’s Limited Warranty 24 ATTENTION THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.
Important Safety Instructions Important Electrical Information When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock: 1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: 1.
Important Operation Instructions • • • • • • NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually. NEVER use your treadmill during an electrical storm.
TR600 Assembly Instructions 1 3 Main Base Frame Console 21 162 2 163 Hardware Step 2 4 100 99 99 100 55 99 5 100 99 100 99 54 99 100 80 102 80 125 125 4 5 NOTE: This step may work better with a second person assisting. 1. Connect the Middle Computer Cable (54) to the Upper Computer Cable (53). 2. Connect the Speed Cable (162) and Speed/Hand Pulse Complex (28). 3. Connect the Incline Cable (163) and Incline/Hand Pulse Complex (29). 4.
4 Console Mast Support Hardware Step 4 #125. 5/16” x 3/4” Button Head Socket Bolt (4 pcs) 125 9 125 1. Install Console Mast Support (9) between Left and Right Uprights (4) and (5). Use the combination M5 Allen Wrench and Phillips Head Screw Driver (102) to tighten four Button Head Socket Bolts (125). TR600 Treadmill 8 5 Final Process 103 103 1. The final step will be to plug the power cord into the treadmill and the other end into the wall outlet.
CAUTION: Do not attempt to move the unit unless it is in the folded and locked position. Remove the power cord from the front of the unit to avoid possible damage. Use both handrails to maneuver the unit to the desired position. Operation of Your Treadmill TR600 Console Folding Instructions TO FOLD THE TREADMILL Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it is secured by the locking telescoping tube assembly on the right side of the base.
Quick-Start Operation 1. Attach the Safety key to enable the display (if not already on). 2. Press the Start key to begin belt movement. Adjust to the desired speed using the Speed 5/6 keys (console or handgrip). You may also use the Quick Speed keys 2 through 10 to adjust the speed. 3. To slow tread-belt press and hold the Speed 6 key (console or handgrip) to the desired speed. You may also press the Quick Speed keys 2 through 10. 4. To stop the tread-belt press the Stop key or pull away Safety key.
Programmable Features Preset Program Profiles Ascent - Work Ascent - Incline Glute Blast - Work Glute Blast - Incline Adventure - Work Adventure - Incline Xtreme - Work Xtreme - Incline Interval - Work TR600 Treadmill Interval - Incline 14 The TR600 Treadmill has five factory preset programs, two user defined programs and one manual program. To Select and Start a Preset Program 1. Press the desired program key. Press Enter to select the program.
Heart Rate User Programs 1. Select User 1 or User 2 via the Program key then press Enter. Note that the dot matrix will show a single row of dots at the bottom of the display (Unless there is a previously stored program). 2. If Enter was pressed, the Display will now be blinking a value, indicating your Age (default is 35). Entering your correct age affects the Heart Rate Bar Graph Display and the Heart Rate programs. Use the 5/6 keys to adjust, then press Enter.
General Maintenance Rate of Perceived Exertion Heart rate is important but listening to your body also has a lot of advantages. There are more variables involved in how hard you should workout than just heart rate. Your stress level, physical health, emotional health, temperature, humidity, the time of day, the last time you ate and what you ate, all contribute to the intensity at which you should workout. If you listen to your body, it will tell you all of these things.
Treadbelt Tracking Adjustment Belt/Deck Lubrication Procedure The treadmill is designed so that the tread-belt remains reasonably centered while in use. It is normal for some belts to drift near one side while in use, depending on a user’s gait and if they favor one leg. But if during use the belt continues to move toward one side, adjustments are necessary. First, you want to clean between the belt and deck to remove any debris that may be trapped. Use a clean, non-fraying rag, t-shirt, or light towel.
Service Checklist - Diagnosis Guide Error Messages Before contacting us for aid, please review the following information. It may save you both time and expense. This list includes common problems that may not be covered under the treadmill’s warranty. LS: The treadmill hasn’t received a speed signal for 8 seconds. E1: Console memory malfunction or CPU problem. E2: Incline position error. Problem Solution/Cause Display does not light 1. Tether cord not in position. 2.
Manufacturer’s Limited Warranty Engineering Mode The console has built in maintenance/diagnostic software. The software will allow you to make changes to the console settings such as changing units from English to Metric or turning off the console beeps (if they are waking your family during your early morning workouts). To enter the Maintenance Menu (may be called Engineering Mode, depending on version) press and hold down the Start, Stop and Enter keys and enter the Saftey key.
3000 Nestle Road Jonesboro, AR 72401 www.xterrafitness.com - Phone:870-336-4286 ©2014 All RIghts Reserved.
