Operation Manual

10
TR600 Treadmill
TR600 Treadmill
11
The treadmill is equipped with four transport wheels that are engaged when the treadmill is
folded. After folding simply roll the treadmill away.
CAUTION: Do not attempt to move the unit unless it is in the folded and locked position.
Remove the power cord from the front of the unit to avoid possible damage. Use both
handrails to maneuver the unit to the desired position.
Transportation Instructions
 TO FOLD THE TREADMILL
Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it is
secured by the locking telescoping tube assembly on the right side of the base. You will
hear it pop into place when secure.
 TO UNFOLD THE TREADMILL
Apply slight forward pressure* on the treadmill running deck with your left hand. Pull out
on the round knob and slowly lower the running deck to the oor. The deck will lower
unassisted when it reaches about waist high.
*At the rear roller area to relieve pressure on the locking system.
Folding Instructions
Operation of Your Treadmill
TR600 Console
Power the treadmill on by plugging it into an appropriate wall
outlet, then turn on the power switch located at the front of
the treadmill below the motor hood. Ensure that the safety
key is installed, as the treadmill will not operate without it.
When the power is turned on, a message will scroll across
the dot matrix showing the current software version. The
treadmill will then enter idle mode, which is the starting point
for operation.
Getting Started
Integrated
Speakers for
MP3 player
Large LCD
with feedback
and scrolling
message center
Turbo Fan to
keep you cool
Convenient water
bottle holder and
cargo compartment
for phone or MP3 player
Audio Input
Jack for
customized
listening