Instruction Manual

ASSEMBLING YOUR METAFLY

Legs, wings, tail and rudder must be assembled to

MetaFly’s body. It is very simple if you follow strictly

the instructions below but might be tricky if you don’t.

Please proceed with care as all parts are tiny, and make

sure you wear your reading eyeglasses (if needed).

1/ LEGS

1 - Slide the “hook” at the end of the leg below the screw

head (the screws come already assembled on the

frame).

2 – When it’s in the right position, fix it by tightening the

screw (use the supplied screwdriver).

2/ TAIL

This require more attention, please follow strictly this 3

steps process: