Instruction Manual

(saving battery power).

Transmitter low batteries warning:

If the power button starts flashing fast, you should

replace the batteries.

Note: Most of the time, the transmitter batteries become

low during the charging process. The charging will be

stopped and MetaFly will not be fully charged. It is

then impossible to recharge MetaFly again without

replacing the batteries.

III - CHARGING METAFLY ON THE

TRANSMITTER

Turn on the power of the transmitter by pushing on the

power button. Then Insert MetaFly’s connectors into the

charging slot of the transmitter. Be careful to insert

MetaFly in the right direction as shown on the picture.