User's Manual

H6 PRO Intelligent Diagnosis

【Record diagnostic data every moment】

2.2 Connecting vehicle

2.2.1 Connecting vehicle

Turn on the car ignition switch, connect the VCI diagnostic box to the car OBDII

diagnostic port, wait for 5 seconds for Bluetooth to connect successfully, and select

the function for vehicle fault diagnosis.

① H6PRO Tablet

② VCI box (communication with the tablet by wire or Bluetooth connection, and

connect with ③⑤ components to the vehicle diagnostic port)

③ Main cable

④ Tested vehicle

⑤ OBDII-16 Adapter (Select other adapters when the diagnostic port is a

non-standard OBDII 16pin connector)

2.2.2 Car diagnostics precautions

1、Battery voltage range on the car: +9~+36VDC;

2、When testing the harness, apply the hand to pinch the front end of the harness for

plugging and unplugging, and do not plug it obliquely to avoid damage to the

terminal.

3、When performing some special function tests, the operator must follow the prompts

and meet the test conditions. If there are special functions, the conditions must be met:

engine water temperature 80 °C ~ 105 °C, turn off the headlights and air conditioning,

the accelerator pedal remains loose. Open position, etc.

4、If the model or electronic control system to be detected is not found in the H6pro

①

②

③

④

⑤