User's Manual
Table Of Contents
- TRADEMARKS
- COPYRIGHT
- DECLARATION
- OPERATION INSTRUCTIONS
- CAUTIONS!
- AFTERSALES-SERVICES
- 1GENERAL INTRODUCTION
- 2GETTING STARTED
- 3UPDATE
- 4DIAGNOSIS
- 5SPECIAL FUNCTIONS
- 6SETTINGS
- 7REPORT
- 8REMOTE ASSISTANCE
- 9FACTORY RESET
- 10FAQ
- Q1: FAILED TO GENERATE DIAGNOSIS REPORT
- Q2: HOW TO PRINT DIAGNOSIS REPORT
- Q3: FAILED TO EXTRACT FILES
- Q4: MAILBOX SUPPORTED
- Q5: HOW TO MAKE AN APPOINTMENT FOR REMOTE SUPPORT
- Q6: HOW TO GENERATE AND UPLOAD DIAGNOSTIC LOG FILE
- Q7: HOW TO SWITCH THE LANGUAGE TO NON-ENGLISH
- Q8: FAILED TO DIAGNOSE VEHICLE
- Q9: FAILED TO ACTIVATE OR REGISTER
- Q10: FAILED TO TURN ON WHEN CHARGING
- Q11: FAILED TO OPEN THE DIAGNOSIS APP
- Q12: FAILED UPDATE APP
III
the product according to the manual.
The configuration, function, appearance and UI of this product
involved in the user manual will continue to be optimized, and
the manual may not be updated in time. Please refer to the
actual product if there is any difference. The final interpretation
right belongs to Shenzhen Xtooltech Intelligent Co., Ltd.
OPERATION INSTRUCTIONS
For safe operation, please follow the instructions below:
Keep the device away from heat or fumes when you use it.
If the vehicle battery contains acid, please keep your hands
and skin or fire sources away from the battery during
testing.
The exhaust gas of the vehicle contains harmful chemicals,
please ensure adequate ventilation.
Do not touch the cooling system components or exhaust
manifolds when the engine is running due to the high
temperatures reached.
Make sure the car is securely parked, Neutral is selected
or the selector is at P or N position to prevent the vehicle
from moving when the engine starts.
Make sure the (DLC) diagnostic link connector is
functioning properly before starting the test to avoid
damage to the Diagnostic Computer.