User's Manual
Table Of Contents
- TRADEMARKS
- COPYRIGHT
- DECLARATION
- OPERATION INSTRUCTIONS
- CAUTIONS!
- AFTERSALES-SERVICES
- 1GENERAL INTRODUCTION
- 2GETTING STARTED
- 3UPDATE
- 4DIAGNOSIS
- 5SPECIAL FUNCTIONS
- 6SETTINGS
- 7REPORT
- 8REMOTE ASSISTANCE
- 9FACTORY RESET
- 10FAQ
- Q1: FAILED TO GENERATE DIAGNOSIS REPORT
- Q2: HOW TO PRINT DIAGNOSIS REPORT
- Q3: FAILED TO EXTRACT FILES
- Q4: MAILBOX SUPPORTED
- Q5: HOW TO MAKE AN APPOINTMENT FOR REMOTE SUPPORT
- Q6: HOW TO GENERATE AND UPLOAD DIAGNOSTIC LOG FILE
- Q7: HOW TO SWITCH THE LANGUAGE TO NON-ENGLISH
- Q8: FAILED TO DIAGNOSE VEHICLE
- Q9: FAILED TO ACTIVATE OR REGISTER
- Q10: FAILED TO TURN ON WHEN CHARGING
- Q11: FAILED TO OPEN THE DIAGNOSIS APP
- Q12: FAILED UPDATE APP
46
5.7 INJECTOR CODING
This function can write the identification code of the fuel injector
into the ECU so that the ECU can recognize and work normally.
Write actual injector code or rewrite code in the ECU to the
injector code of the corresponding cylinder for controlling
accurately and correcting cylinder injection quantity.
After the ECU or injector is replaced, the injector code of each
cylinder must be confirmed or re-coded so that the cylinder can
better identify injectors to accurately control fuel injection.
In general cases, there is no need to do the coding
matching function after cleaning.
The identification of the fuel injector includes its
working accuracy value and type value. When replacing
it, you need to find the corresponding model for
replacement.
At present, mainstream cars support injector coding
functions.
The operation guidelines of the Injector Coding function
are shown as below:
1. Enter the Injector coding menu and choose relevant
chassis models according to the vehicle being tested.
2. Enter the Fuel injection nozzle injection volume
adjustment menu.
3. Read the note displayed carefully and press OK after the
reading.