User's Manual

VEHICLE CONNECTION
The V200 should establish communication with the vehicle, and
Bluetooth should be connected between the tablet and the V200.
Please follow the steps below.
Fig 4-1
1. Turn on the tablet.
2. Connect the vehicle, the V200 and the tablet following the
diagram below. Usually, the OBD port is located under the
dashboard, inside driver’s footwell.
3. Wait for the VCI box to communicate with the tablet, then click
into the menus to perform the functions.
 If necessary, please connect the V200 with the tablet using the USB 3.0 to USB-B
cable, especially when working on some processes that needs to transfer lots of data.