User's Manual
8
down the battery into place. Re-assemble the back cover.
To uninstall the battery, flip the battery out from the bottom of the battery.
2.1.2. Charging the battery
Plug the charger into the socket on the side of your phone. Connect the charger to an AC wall socket.
The blinking of the battery level icon indicates the battery is being charged. When the blinking stops, it
indicates the charging is finished
During charging, the phone and charger will feel warm to the touch. This is normal.
Warning:
The operating ambient temperature of the charger is 0C-50C. Do not use it when the
temperature exceeds this limit.
Use only chargers approved by the phone manufacturer to ensure safety. Failing to comply with
this will violate the terms and conditions of the warranty.
2.1.3. Using the battery
The waiting time and calling time capacities specified by the phone manufacturer are obtained under
the ideal operating environment. The actual values will vary with the network condition, operating
environment and operation method.
Please comply with the local regulations of disposing the battery (such as recycling). Do not dispose it
as household waste.
2.1.4. Battery level indicator
When the phone is on, the battery level indicator is located at the upper right corner of the screen.
2.2. Connecting to the Network
2.2.1. SIM card
Please insert available Subscriber Identity Module (SIM) card into your phone before using it. SIM card
is supplied by your network carrier.
All the information related to network connection is recorded on the SIM card, so are the contact
information such as names, phone numbers and SMSs that you set to store on the SIM. You can take
out the SIM card from the phone and insert it into another GSM phone to use it. Most new phones will
recognize the SIM card automatically.
Do not touch the golden contacts of the SIM card and place it away from electricity and magnetism to