User Manual Model: FX2.
Introduction © 2016. All rights are reserved. No part of this document may be reproduced without permission. While all efforts have been made to ensure the accuracy of all contents in this manual, we assume no liability for errors or omissions or statements of any kind in this manual, whether such errors or omissions or statements resulting from negligence, accidents, or any other cause. The contents of this manual are subject to change without notice.
Do not switch your handset on when the use of wireless devices is prohibited or when the wireless device may cause interference or danger. Do not use your phone while driving. Follow relevant rules or regulations in hospitals and health care facilities. Switch your phone off near medical devices. Switch your phone off in aircraft. The radio signal from it may cause interference in signals of the aircraft. Switch your phone off near high-precision electronic devices.
Do not place your phone and its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them. Do not put your phone in a high-temperature place or use it in a place with flammable gas such as a petrol pumps. Observe any laws or regulations on the use of phone. Respect others' privacy and legal rights when using your phone.
Phone code could prevent your phone from illegal use. The default phone code is 1234. Please change it to your own as soon as possible. Notes: Please remember the code; otherwise some service expense may happen. PIN and PUK PIN Code PIN code could prevent your UIM card from illegal use. When PIN is lock is on, you should enter the PIN code when powering on the handset again. The network provider offers you PIN code (four to eight digit).You should change PIN code as soon as possible for security.
Call Key Make or answer a call. Press the Call Key in standby mode to enter All Calls list. END key End an active or reject a call. Hold to Power On/Off. Exit from any interface to standby mode. Left soft key Enter main menu in standby mode. Select the correct option on a different interface Right soft key Enter all the contact in standby mode. In the menu interface execution returns Navigation keys Move the cursor up, down. In standby mode, used as hot keys to enter the designated functions.
Delete multiple & more. Search function enables you to find contacts quickly. Message Write message: From the main menu select “Write message” to create message. You can save your messages that you send often to “Save as draft”. While writing a message, select “ Option ” to access all the messaging options like Send/Add contact info/Insert template/Save as draft/Exit Inbox: Received messages are listed in this item. Outbox: Sent failed messages are listed in this menu.
5. If you need to set the photo effects used in the camera viewfinder state path: left soft key> Effect> Normal / B & W / Blue / Green / Yellow / Red / Sepia /Negative. Multimedia Audio player Play an audio file 1. Path of operation: Main menu> Multimedia> Audio. 2. Player interface on the key or the option to enter the playlist update list (need to plug the T-card, MP3 files in the My Music file) 3. Select the music track list, press the [OK key] music files start playing.
Language: set the phone language. Auto power on/off: set auto power on/off. Date and Time: Set the phone to the reference time: time display format date display format. Call Settings: Call waiting: If the call waiting function is ON, the network will alert you and the mobile phone screen will display the incoming call number if others are calling you while you are already in a conversation.
2. Choose the new date of the event in the calendar, press the [OK key] to display details. 3. Option select "Add new schedule" in the calendar entry is set to enter the event Subject, date, time, Ringtone, Repeat mode. 4. After completing the settings, press the left soft key to save the information. Alarm: The alarm can also be set for a specific time at a specific date loop start alarm. When the phone is set to silent or turned off, the alarm function is still available. Set the alarm 1.
Browser Internet is an application platform integrating wireless communication and Internet technology, which makes it possible for you to access to rich Internet information source and e-commerce application etc. Open the starting page of the browser, users can enter into input URL, search, bookmarks, history and stored pages through the interfaces. Problems and solutions To save you time and unnecessary expense in contact before the professional service, the following simple checks.
UIM card is damaged, contact your network service provider. Unable to connect to the network Weak signal to a strong signal to retry. Beyond the network coverage area of the network service provider. UIM card is invalid, contact your network provider. Number call can not be set aside Please confirm whether pressing the dial key after dialing. Please confirm whether arrears banned call. Please make sure the UIM is valid. Please confirm whether the call barring function.
time. Please move to signal strong or temporarily turn off the phone. Need to replace the battery, replace the batteries with new ones. Can not be charged Poor contact, check if the plug is connected. The filthy accumulation, with a soft clean cloth to wipe the phone and battery wiring port. Charge lower than 0 °C or above 45 ℃ environment, change the charging environment. Battery or charger is damaged and need to be replaced.
Note: SJ/T11363-2006 standard limit requirement: Cadmium C d ≦ 100ppm; lead Pb, mercury Hg, hexavalent chromium Cr6 +, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers of PBDEs ≦ 1000 ppm. 1.○: table indicates that the content of this toxic or hazardous substance in all homogeneous materials of the part below the limit requirement in SJ/T11363-2006 standard. 2.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
certification for use at the ear is 0.248W/kg and when properly worn on the body is 1.097W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly.