Instructions / Assembly

Installation & Assembly Instructions
Please contact our Customer Service Division with any questions at:
30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙ [e-mail]
For a full line of products visit www.tritonproducts.com 1 INS3536
Read all instructions completely before installing. Should you have any questions about your installation, please call
Customer Service at 440-248-5480. Missing and damaged parts must be reported within 5 days from receipt of
delivery.
Tools needed for this installation (Not supplied with kit) – Phillips Screwdriver or a Drill with Phillips Head Drill Bits -
Phillips Head Screwdriver – Wrench/Socket (9/16”) and (11/16”) – Assistance from 2
nd
Person
Parts Listing
Quantity Description
4 24x48x1/4 Pegboards
(D= DuraBoard, DBK= Black DuraBoard, TBR= Brown Pegboard, TBK=Black Pegboard, TW= White Pegboard, LVP=Louvered Panel)
1 Upper Frame
1 Lower Frame with 8 holes on one side, 6 on the other, and 2 on top
2 Upright Assembly with Welded Triangular Support
2 Foot Assembly Bases
4 Leg Levelers
1 Handle
4 Phillips Head Bolts
4 ½” Hex Nut
4 ½” Flat Washers
4 ½” Lock Washers
6 3/8”-16x2-1/2” Tap Bolts
6 3/8”-16x1-3/4” Tap Bolts
8 Plastic End Caps
14 3/8” Flat Washers
14 3/8-16 Hex Nuts
14 3/8” Lock Washers
60 10-16x3/4” Phillips Modified Truss Head Self Drilling Screw
Installation
1. Align the Foot Assembly Base holes with the holes on the Upright Assembly with Welded Triangular Support
pieces (Front face of Triangular Support must be facing down). Slide the 3/8”-16x1-3/4” Tap Bolt from the outer
side, on the inner side of the Triangular Supports, slide (1) 3/8” Flat Washer, (1) 3/8 Lock Washer, and (1) 3/8-16
Hex Nut. Tighten using a 9/16” Wrench/Socket. (Repeat for the 2
nd
Base Frame Side)
2. The Lower Frame includes 8 holes on one side, 6 on the other, and 2 on the top. Lay the frames down
horizontally with the set of holes on the bottom side of the Upper Frame with the holes on the top of Lower
Frame. Make sure that the side of the Lower frame with the 8 holes, lines up with the upper frame side which
has 2 holes.
3. Starting from the Upper Frame slide a 3/8”-16x2-1/2” Tap Bolt through the top towards the Bottom Frame. Slide
(1) 3/8” Flat Washer, (1) 3/8 Lock Washer, and (1) 3/8-16 Hex Nut on the Tap Bolt from the Lower Frame.
Tighten using a 9/16” Wrench/Socket.
F2 – 50 In. W Free-Standing Pegboard Unit with 4 Pegboards