User's Manual

Portable Router
PAGE 10 OF 44
Parameters settings
the router support Static IP, Dynamic IP, PPPoE, click “Basic Settings” on the left side of
WEB page, so you should first choose Router’s operating mode.
1. PPPoE
Most DSL provides PPPoE (Point-to Point Protocol over Ethernet) to establish Internet
connection for end-users, to setup the router, you need to enable PPPoE on the router’s
web-based setup page, choose “PPPoE” mode, enter Username and Password provided
by your ISP, the fields are case sensitive, click OK to save settings.
Return to System Status ＞Running Status, check PPPoE says “connected”, if it’s
connected, the PPPoE connection is active, you should able to access Internet via xDSL,
click “disconnect” button to disconnect current Internet connection.