User's Manual

Portable Router
PAGE 14 OF 44
¾ Username: Enter the username provided by ISP, this field is case-sensitive.
¾ Password: Enter the password provided by ISP, this field is case-sensitive.
¾ MTU: the normal MTU (maximum transmission Unit) value for most Ethernet network
is 1500 Bytes, it is not recommended that you change the default MTU size unless
required by your ISP.
¾ Service Name: The service name should not be configured unless you are sure it is
necessary for your ISP, in most cases, leaving these fields blank will work.
¾ Primary/Secondary DNS: If your ISP does not automatically assign IP address during
login, please fill in the DNS address to the field.
Attention: the router only has only one Ethernet port, once it is used to xDSL
(PPPoE ), then the LAN funtion is not available, only WiFi function is available.
3.1.2 MAC Clone
Choose Basic settings > MAC Clone, you can configure the MAC address of the WAN
on the screen below: