User's Manual

Portable Router
PAGE 17 OF 44
z 802.11b only-the Router works on 802.11b only.
z 802.11g only-the Router works on 802.11g only.
z 802.11b/g mixed-the Router works on 802.11b/g.
z 802.11g/n mixed-the Router works on 802.11g/n.
z 802.11b/g/n mixed-the Router works on 802.11b/g/n.
¾ SSID: (Service Set Identification), must be assigned to all wireless device
s in your network, the default SSID is set to “Portable ROUTER”, you can change
it to another.
¾ Channel: This filed determines which operating frequency will be used, the default
channel is set to 3. it is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
¾ Hide SSID: When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router, if you select the
Hide SSID, the Portable Router will not broadcast its name (SSID) on the air.
3.2.2 Wireless Encryption
Choose Wireless Settings > Wireless Encryption, you can configure the security
settings of your wireless network. there are five wireless security modes supported
by the router: Disable, WPA-PSK,WPA2-PSK,WPA-PSK/WPA2-PSK, Open system,
Auto.
¾ Disable: if you do not want to use wireless security, select this check box, but it’s
strongly recommended to choose one of the following modes to enable security.
¾ WPA-PSK/WPA2-PSK: It’s the WPA/WPA2 authentication type based on
pre-shared passphrase.