User's Manual

Portable Router
PAGE 38 OF 44
Note: After you set the DMZ host, the firewall related to the host will not work.
3.5.6 Special Application
Some applications require multiple connections, like Internet games, Videoconferencing,
these applications can not work with a pure NAT router, port Triggering is used for some of
these applications that can work with an NAT router, the page as follows:
¾
Name: Enter a description for the rule.
¾ Trigger Port: The port for outgoing traffic. An outgoing connection using this port will
trigger this rule.
¾ Forward Port: The port used by the remote system when it responds to the outgoing
request. A response using one of these ports will be forwarded to the PC that
triggered this rule. You can enter group of ports must be set apart with
“ , ” F o r example: 2000-3000, 4340-4360 and so on..
¾ Enable: The status of this entry either enabled or disabled.
To add a new rule:
1. Enter the Name for the entry.
2. Enter a port number or a ports range used for Trigger Port.
3. Enter the port number or a ports range used by the remote system when it responds
to the PC’s request.
4. Click Add To List button to add the entry.