Operation Manual

TANGO™ User Manual
8 I English
Maintenance
Cleaning
Gently wipe away dust on Tango and its grille with a dry, soft lint-free cloth.
Do not use any cleaners, sprays, or chemicals.!
Removing a Universal Dock Adapter
To remove an insert from the Dock, use your fingernail in the slot in the back
of the adapter.
Remote Control Battery replacement
Type: CR2025 3-Volt Lithium battery
How: Press the release latch for battery
drawer at bottom of the remote.
Pull out battery drawer and lift battery out.
Troubleshooting
Problem: No sound
• Make sure your iPod is firmly seated in the Universal Dock well.
• Make sure iPod is on and playing audio content
• Make sure the power cable is plugged into the back of Tango and into
a working outlet
• Undock your iPod, wait 5 seconds, and replace it in the dock.
• Reset Tango: Unplug the power cable, wait 60 seconds, and then
plug it back in.
• Be sure your iPod is running the latest version of the iPod software.*
iPod isn’t docking correctly
• Make sure the Universal Dock Adapter is the correct one for your iPod **
Tango does not respond to the remote control
• Tango has an LED behind the speaker grill that will glow when it receives
the remote signal.
If the LED does not glow:
• Make sure no solid objects block Tango’s speaker grille
• Replace the remote control battery.
If the LED does glow:
• Undock your iPod, wait 5 seconds, and replace it in the dock.
• Be sure your iPod is running the latest version of the iPod software.*
• Reset Tango: Unplug the power cable, wait 60 seconds, and then plug it
back in.
*Visit http://www.apple.com/support/ to download the latest software for
your iPod.
**Adapters are included for the iPod nano, and iPod with video (30GB and
60GB). Additional Universal Dock Adapters are available from Apple.