I � us CORDLESS DRILL ITEM N0.:47519 OWNER'S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER) FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.
IMPORTANT SAFETY INFORMATION Carefully read through this entire Instruction Manual before using your XTREMEPOWERUS Power Tool. Take special care to heed the Cautions and Warnings. XTREMEPOWERUS power tool has many features that will make your job faster and easier. Safety, performance, and dependability have given top priority in the development of this tool, making it easy to maintain and operate. GENERAL SAFETY RULES common sense when operating a power tool.
IMPORTANT SAFETY INFORMATION GENERAL SAFETY RULES BATTERY TOOL USE AND CARE adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. ■ ■ ■ ■ ■ ■ ■ Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. ■ Maintain power tools.
IMPORTANT SAFETY INFORMATION ADDITIONAL SAFETY INSTRUCTIONS ■ When using the tool, including safety glasses and protective clothing Wear a dust mask if operation creates dust. Children and frail people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.
IMPORTANT SAFETY INFORMATION ADDITIONAL SAFETY INSTRUCTIONS FOR THE CHARGER ,A.WARNING! ■ ■ Do not allow any liquid to come into contact with the charger. There is a danger of electric shock. Do not position the tool or battery charger near water; for example, near a sink, wash bowl or toilet. Do not spill liquid of any kind on the tool or charger. Doing so may short out parts, Causing damage to the product and creating the risk of fire or electric shock.
IMPORTANT SAFETY INFORMATION ADDITIONAL SAFETY INSTRUCTIONS RELATED TO THE BATTERY PACK AND BATTERY SAFETY The most suitable temperatures to charge the battery pack are between 20 -25 ° C. ■ Always allow the battery pack to cool down after charging, do not place it in a hot environment such as a metal shed or open trailer left in the sun. ■ Take care where the tool is stored. Do not store in areas of corrosive fumes, or salt air or similar conditions.
IMPORTANT SAFETY INFORMATION UNPACKING ■ ■ ■ Unpack all parts and lay them on a flat, stable surface. Remove all packing materials and shipping devices, if applicable. ■ Ensure that you have all the accessories and tools needed for assembly and operation. This also includes suitable personal protective equipment.
DESCRIPTION 3 9 10 8 6. Battery pack release button 7. Battery pack 8. Variable speed switch 9. LED light 10. Battery capacity indicator 1. 10mm keyless chuck 2. Torque adjustment collar 3. 2-Speed gear control 4. Forward/Reverse rotation control 5.
TECHNICAL DATA SPECIFICATION 100-240V ~ 50/60Hz Charger Battery Lithium-ion 2.0 Ah Charging time around 1 hour No-load speed 0-400 I 0-1500 rpm Torque settings 18 + 1 + 1 Max. torque 25N.M. Chuck capacity 10mm keyless chuck Max. drilling capacity for steel 6mm Max. drilling capacity for wood 16mm OPERATING INSTRUCTIONS FOR DRILL DRIVER [I] NOTE: Before using the tool, read the instruction book carefully.
OPERATION 1. ON / OFF SWITCH (SEE FIG. 2) Depress the On/Off switch (8) to start and release it to stop your drill. The on/off switch is fitted with a brake function which stops your chuck immediately when you quickly release the switch. It is also a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger precision.
OPERATION 5. CHUCK ADJUSTMENT (SEE FIG. 6) 7. USING THE LED LIGHT (SEE FIG. 8) To open the chuck (1) jaws rotate the front section of the chuck. Insert the drill bit between the chuck jaws and rotate the front section in the opposite direction. Ensure the drill bit is in the center of the chuck jaws. Finally, firmly rotate the front chuck section in the opposite directions. Your drill bit is now clamped in the chuck. The LED light (9) allows you to keep a clear view under less illuminated circumstances.
OPERATION ■ Overheated: Under the condition above, if the tool does not start, the Battery are overheated. In this situation, let the Tool and Battery cool before pulling the Trigger Switch again. ■ Low battery voltage: The remaining Battery capaci ty is too low and the tool will not operate. In this situation, remove and recharge the Battery. drilled dry. The cutting lubricants that work best are sulfured cutting oil or lard oil.
12
Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 13-1 13-2 14 15 16 17 18 19 20 21 22 23 Description M5*22 screw Drilling chuck Gear box assem. M3*6 screw Motor gear 550 motor Double speed push button Double speed push button spring Double speed push button click spring Click lever Capacity show transparent cover Trigger Contact piece assem. Contact shelf Contact piece Buckle Battery pack Gear shrapnel LED transparent cover Capacity show plate Magnetic tube Body housing ST2.
DISCLAIMER PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.