Use and Care Manual

OPERATION

GASOLINE ENGINE

1. Turn the STOP SWITCH clock-wise to the

position “I” (ON).

2. Open the fuel cock.

3. Set the speed control lever 1/3 to 1/2 of the

way towards the high speed position.

4. Close the choke lever. If the engine is warm or

the ambient temperature is high, open the choke

lever half-way, or keep it fully open. If the engine is

cold or the ambient temperature is low. Close the

choke lever fully.

5. Pull the starter handle slowly until resistance

is felt. This is the “compression”point. Return the

handle to its original position and pull swiftly.

6. DO NOT pull out the rope all the way. After

starting the engine, allow the starter handle to

return to its original position while still holding the

handle.

OPERATION