When installing and using this electrical equipment, basic safety precautions should always be followed, including the following: These instructions are for correct installation, and optimum performance of the Bath pumps, so they should be read carefully. These are single-stage centrifugal pumps designed to operate with compact hydro-massage equipment, They are equipped with a total-emptying to prevent the discharge of residual liquid in each stopping.
The pumps should be installed horizontally, securing them with screws through the holes in the supports to prevent undesirable noise and vibration.The suction, pipe of lhe pump should be as short as possible. The rating Label must be visible after inst allat ion. Part s cout aining live part s, except parts supplied with safet y ext ra low voltage<12V, must be inaccessible to a person in t he bath. Class I appliances must be permanent ly connect ed t o fixed wiring.
0 H H (m) (PSi) 0 35 24 20 40 20 60 40 80 60 100 120 80 140 160 120 100 180 160 140 30 25 20 15 10 200 220 U.S.GPM 180 IMP.
Black(L) Black Wh ite White(N) Brown 4 5 1 Green(E) Orange (a) Black Green Capacitor 3 79.6 Yellow (m) 77.1 88 ∅77.5 209.2 227.5 232.8 ∅77.5 210.9 Model 75026 194.9 76 164 424.3 Qmax Hmax (L/min) (m) 800 17 Volts/Hz 220-240/60 Power(P1) KW HP 2.2 3 Amps 10.
1 2 3 8 6 2 1 10 7 3 11 4/5 Ref.NO. 1 9 13 12 PART NO.
6