Instructions / Assembly

ADJUSTABLE

FLOAT TETHER

TETHER

ADJUSTMENT NOTCH

UNIVERSAL FITTING

Driving motor in AISI 316 stainless steel

Handle coated with insulating rubber

Double mechanical seal with oil chamber

interposed, carbon/aluminum on motor

Silicon carbide on pump side

Dry motor, asynchronous, watertight, cooled

by the pumped liquid itself

FEATURES

SPECIFICATIONS

Standard thermal protection in the winding

NOTE: DO NOT install the Pump by suspending it unsupported from its delivery pipe or power cord. The

Pump must be suspended from the handle or be placed on the bottom of the basin. To ensure that the

Pump works properly, keep the bottom free from sludge and dirt of all kinds.

NOTE: If the water level sinks too low, any sludge in the basin will dry out and stop the Pump from

starting. To help ensure the Pump will start as required, check the Pump regularly with start-up tests.

AREAS OF USE

1. This Pump is designed to pump water only.

2. This Pump is designed to be used for: • Removing ground water from basements and outdoor job

sites • Very high ow

3. This Pump should NOT be used for: • Continuous run, fountain/pond water features • Basement

sump applications • Septic or sewage systems • Potable water systems

4. This Pump can also be used to transfer water (e.g. household, farming, plumbing).

DIAGRAM AND SPECIFICATIONS