Instructions / Assembly

3
IMPORTANT SAFETY INFORMATION
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
DO NOT abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric
shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual cu
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal injury.
DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled
with the switch is dangemus and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If damaged,have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
SAVE THESE WARNINGS
Make sure the extension cord is in good condition. When using an extension cord, be sure to use one that
is heavy enough to carry the current that your product will draw. An undersized cord will cause a drop in
line voltage, which will result in loss of power and overheating.
Before connecting the motor to the power line.make sure the switch is in the OFF position and the electric
current is rated the same as the current stamped on the motor nameplate. Running at a lower voltage will
damage the motor.
This tool must be grounded while in use in order to protect the operator from electric shock.
DO NOT place excessive body weight on the machine.
DO NOT use an ice auger bit In earth or an earth auger bit in ice. A different style of auger bit is required for
each type of drilling.
DO NOT use the auger in excessively rocky ground.
DO NOT submerge earth auger in any liquids.
DO NOT use products that contain ammonia, chlorine, or abrasives.
DO NOT use chlorinated cleaning solvents, carbon tetrachloride, kerosene, or gasoline.
Keep earth auger body clean. Use a soft cloth dampened with a mild soap and water mixture and wipe the
earth auger body to clean.