Instructions / Assembly

IMPORTANT SAFETY INFORMATION INFORMATION / ASSEMBLY / OPERATION

PACKAGE CONTENTS:

1 x 1200W electric earth auger

1 xAuger bit

2 x Bolt

2 x Nut

1 x Hex spanner

1 x Manual

CAUTION:

• Remove all packing materials

• Remove remaining packaging and transit supports (if exisng)

• Check the completeness of the packing content

• Check the appliance.the power cord.the power plug and all

accessories for transportaon, damages.

• Keep the packaging materials as far as possible ll the end of

the warranty period. Dispose it into your local waste disposal

system aerwards.

TECHNICAL DATA:

Power supply voltage: 110V- 60Hz

Power consumpon: I0.9AMP

Diameter auger bit: 4 inch

Drilling depth: 560mm

Neo weight: 12.8kg

SOUND EMISSION :

ATTENTION! The sound power pressure may exceed 85 dB(A), in this case individual hearing protection

must be worn.

ASSEMBLY

1. Put the auger into the output shaft of the auger bit;

2. Insert the bolt;

3. Lock it with the nut.

OPERATION

1. Before starting machine, position auger upright at desired drilling point.

2. Position feet stable and away from the auger bit.

3. Firmly grip the two handles with both hands.

4. Slowly squeeze the switch trigger to rotate the auger bit.

5. Press the handles lightly downward to drill a hole.

6. Raise the auger frequently to help clear drilling debris from the hole.

7. Overloading the auger during drilling may cause it to stop turning. When this occurs, lift the auger to reduce

the drilling load on the motor, and allow drilling debris to be augered out of the hole and resume drilling.