Use and Care Manual

ManualsBrandsXtremepowerUS ManualsFans30 in. 230-Watt High-Velocity 3 Speed 30 in. Pedestal Fan Aluminum Blades and Adjustable Height and Tilt Head

30” PEDESTAL FAN

SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,

OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S

SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH

AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)

OWNER’S MANUAL AND SAFETY INSTRUCTIONS

ITEM: 92017

FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.0880 MON-FRI 9AM TO 3PM PST

Summary of content (6 pages)

PAGE 1
30” PEDESTAL FAN ITEM: 92017 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER) FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.
PAGE 2
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Intended Use: This product is intended for indoor residential and office use only, not for industrial or other commercial applications. Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances.
PAGE 3
PARTS 1. Fan Base 2. Base Coupler 3. Stand Pipe 4. Adjuster 5. L-Shaped Adjustment Screw 6. Extension Pipe 7. Motor Bracket 8. Motor 9. Pull Switch 10. Rear Guard 11. Blades 12.
PAGE 4
ASSEMBLY STAND AND BASE ASSEMBLY 1. Place stand assembly with the spring on the base frame and align the holes in the coupler with holes in the base frame. 2. Insert screws and spring washers from the screw package and tighten securely. STAND ASSEMBLY 1. Make sure the spring is in the stand assembly. 2. Remove the two screws from the extension pipe adjuster. 3. Insert the extension pipe into the stand pipe. 4.
PAGE 5
OPERATION and MAINTENANCE 1. Place the fan on a safe, flat surface where it cannot fall or be pulled by the cord, and in the upright position. 2. Select desired direction of air flow by tilting the fan upward or downward. 3. Plug unit into the electrical outlet. 4. Pull the chain on the motor assembly to set desired setting; high, medium and low. 5. Always turn off (0-off) and unplug the fan after using. CLEANING: Before cleaning the fan, be sure to disconnect power cord from the power outlet.
PAGE 6
CARE AND MAINTENANCE PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.