Instructions / Assembly

ManualsBrandsXtremepowerUS ManualsElectric Fireplaces20 in. 1500-Watt 3-Sided Free Standing Compact Infrared Quartz Electric Fireplace Firebox Heater in Vintage Black

Electric Fireplace Stove

Model# SF-25

CONSUMER SAFETY INFORMATION

⚫ Read this manual before installing and operating this appliance

⚫ Failure to follow these instructions may result in electric shock, fire property, or

personal injury

⚫ Do not store or use gasoline or other flammable liquids in vicinity of this

appliance.

-1-

Getting Started

⚫ Remove the appliance from the box.

⚫ Remove any packaging from the product.

⚫ Place the packaging inside the box and either store or dispose of safely.

Contents of Carton

⚫ Heater

⚫ 1 Instruction Manual

⚫ Four Legs

⚫ 8 pcs of 4*12mm screws

⚫ Before operating this unit, please read these instructions completely and save them

for the future use.

⚫ This appliance is not intended for use by persons ( including children ) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning use

of the appliance by a person responsible for their safety.

⚫ Children should be supervised to ensure that they do not play with the appliance.

⚫ In order to avoid any danger, the cable must be changed by the special person from

manufacture, maintain department or relative department if the cable there is any

broken.

-2-

Summary of content (4 pages)

PAGE 1
Electric Fireplace Stove Model# SF-25 Getting Started ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ Remove the appliance from the box. Remove any packaging from the product. Place the packaging inside the box and either store or dispose of safely.
PAGE 2
Assembling Operation Procedure Insert the leg buckles into the holes located on the base of the stove. Fasten the legs using the screws ( 1 screw per leg ) and tighten with a Phillips head screwdriver, as followed picture. ON/OFF ------POWER The power switch supplies power to all of the functions of the fireplace and will illuminate the flame effect. This switch must be lit for any of the functions to work. HEAT I Low heater, Turn on this button the power is 750W.
PAGE 3
Temperature control Adjust temperature as your needed. Flame adjustment Adjust flame brightness as your needed. Flame Adjustment When using appliance, basic safety precautions should always be followed: 1. Check that the voltage indicates on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply. 2.
PAGE 4
Safety Cut-Off ⚫ WARNINGS AND CAUTIONS WARNING To avoid electrical shock not open the back panel of the insert unless the Power has been turned off. And the insert has been unplugged. WARNING Any electrical repairs.to this electric fireplace. Should only be Performed by a qualified technician. WARNING Any electrical wiring repairs should only be performed by a qualified Technician. And also must comply with local buildings codes.